Search results for query: *

I know, that TN750 doesn't work on CM. Does TN2501 work on G3V8?

I did trace. Telekom provider was sending 9xxxxxxxx number instead of xxxxxxxx, so when call-disp button was pressed it dialed 09xxxxxxxx.

I programmed msg-retr button on phone. When i try to call missed number with call-disp button, it dials 9 and number. I need to change to 0 and number. Where can i change that?

I need to change Audix mailboxes to 3 digit numbers. I administered on Switch link admin extension lehth to 3, but when I type change machine, it shows 4. I cannot edit it. I am missing some commands, or what I am doing wrong?

Oh, working directory was bad. Now i'm gonna check, how it is working. I hope it will work like G150, not like small office.

Sun 21/10/2012 11:26:20 : Received BOOTP request for 00e007017e0a 192.168.42.10 ip401ng.bin Sun 21/10/2012 11:26:20 : Sending BOOTP response for 00e007017e0a 192.168.42.10 ip401ng.bin And nothing happens what should i do?

So i have to use G150 manager and IP401ng file, which i found in catalog?

Hi, what firmware files should be uploaded to G150? Does ip401ng fits for that?

The problem occured in these phones. Ringer cut off is activating automatically. And I cannot assign a button to deactivate it. I must remove the station and recreate. Also connection to PBX is very poor, it is dropping all the time.

I can enter any IP address of messaging, but I think it should be on the same subnet as processor ethernet. Am i right?

Actually i can check it through messaging administration, but it is still not enabled, cause I didn't entered Messaging IP address. I don't know IP address yet, and I want to check license file, how many ports are opened.

I just want to configure messaging on S8400. How I can check if it is enabled through license file?

Avaya 655A power supply PS-RGEN 1540 test fails with 36 or 34 error codes. What these errors means? There are no such erros in documentation.

Actually it was CA-TSC request set to as-needed. Now it is set to none. And i have no idea, what this thing does.

Trunk is up. From list tra sta same result: denial event 1220: Recovery on timer expiry D1=0x944 D2=0x66

I get: denial event 1220: Recovery on timer expiry D1=0x944 D2=0x66 IP Office gets nothing

sc - 868726656 feat - DialExtn TN - 201 (or whatever) This is now not working. It was working before. I don't understand. It looks simple, but something is wrong.

I changed on CM: change route-pattern 3 Page 1 of 3 Pattern Number: 3 Pattern Name: IPOffice SCCAN? n Secure SIP? n Grp FRL NPA Pfx Hop Toll No. Inserted DCS/ IXC...

I think it is not a skill. It is simple hunt group. Does hunt group member has to press FAC to log into hunt group? Member's phone is ringing without entering this FAC. When i enter FAC, (hunt group busy activation), nothing happens.

Is it possible to take queued call out of queue, if hunt group member is not answering. It is always problem with clients and queued calls. Maybe there is possibility to set time of rings, after which call goes out of queue?