Search results for query: *

I can't for the life of me figure out where this is... version R5_0_10 via the netset administration utility. I just need to reset a vmail box please help... tab 2 it is not worthy...

I assumed 9 would get an outside line but it does not

Kwing can you tell me what the ALS sequence would be? I did 310 only line 5 I get a dial tone but it is an internal dial tone.

...like it to only use line 5. Any thoughts? Could not access #313 from ext 10 odd no? Extension 10 has lines 1-3 and not 4&5. Is this a Central programming issue where 10 needs access to 4&5 in order for ** ALS to be setup for ext 18? ACS 7 Partner Messaging 4 port v6.0 Thanks for the help

Thanks for the heads up a little nat ?? ;) Now that they have there dsl up I vpn in... Works like a champ.

Hello, Is there a way to dial in and manage the partner messaging system. I believe there is but can't remember. It is version 6 with a 4 port card and 7 of acs. Remote card is installed as well. Any help would be great. Thanks

Thanks again worked like a charm...

Jay.... You the man... Thanks gonna give it a shot shortly... Best place on the web.

Hello... search is down :(... Up soo I hope... Can any one tell me the voice mail ports/extension for a 5 slot carrier with acs 7 (middle) and partner meesaging (4 port) in slot 1? I cannot remember where this information is.. 39 40 41 42? If I remember right create hunt group 7 #505...

Buff1, Thanks for the response. I have tried the 2) option, but this looks awful... Cross hatching is not the most profressional appearance. I am not familiar with chr(176) Is this a ~ solid shade? I will give it a shot.. I have read somewhere that they have sent a 3 plane of gray to...

Any one have any luck print color gray scale to a monochrome printer. The hp shading just does not cut it...

If the first page &a1G Like a book &a2G Like a pad of paper If The Second Page &a0G ? & l # S # = 0 - Simplex 1 - Duplex, Long-Edge Binding 2 - Duplex, Short-Edge Binding

Figured it out.. I have to set the font color to black befor images data. *v0S Then image data. Then reset the color plane *v6W" CHR(2) + CHR(3) + CHR(8) + CHR(8) + CHR(8) + CHR(8). v255a213b209c8I". v146a51b51c9I". Hope this can help someone else..... Dans thanks for all your help on this...

I far as I know you cannot do this with standard. Sonicalwall says you can do it with enhanced but I have heard you cannot. Have you had any luck? James

...image majick when the image is converted" "You need to be more specific." Othe fill areas will be black and not the correct fill color. <Esc>*v4S Files with the image printered before or after the fill areas are the same with the exception that the imae is moved. "Perhaps the original...

Dans, Thanks for the information it works if I reset the color before the image somewhat but other areas will reset to black. I think the issue is with image majick when the image is converted. Turns out that imagemagick is also only converting the image @ 72dpi in the binary some I am told...

Dans, I think you are correct. Here are to files: http://155.212.60.41/htmlarea/imageok.pcl Here the image is good. When I set the fill area to be yellow you will see the whole image is printed in just yellow. http://155.212.60.41/htmlarea/imagefilledwbackcolor.pcl Can you see this...

Has any one seen this before. THis only occurs if the fill color of the rectagle is other than white or black. I have tried destorying the active and stack palettes but no luck. If I reset the printer looks good good but on a seperate page. Also, I have tried to vary the order of the output...

Thanks for the clarification

Wow there it is .... I use CHR() thanks Jim. Finally found a place for pcl.