Search results for query: *

I tried but it turned out to be a firmware issue. The firmware became corrupted after the USB cable was disconnected too early I believe. I can't get any Samsung firmware to flash and it's still under warranty so I sent it bak to ADATA. I got a replacement after I've recovered the data with...

Hi Goombawaho, Thanks for the info. I got some more info which may help. I use Ghost boot disk. I saw the drive as "H" when I attached to the PC as a 2nd drive. It should have been "F". When I 1st plug it in the PC via the SATA dock, I also have another USB drive plug in. This would...

One more thing, the disk is good. I can see it as a Samsung when I look at the boot sequence. Hope this help for any solution. Thanks.

By the way, the drive did not show up in Disk Management either. I did turn off system restore on the drive months ago too. Thanks for any help.

I have a USD ext hard drive 640G SATA. Win XP will not see it when plug in. I took the drive out, use Kingwin USB dock, XP saw the drive. I opened it read files fine. I copy it to another USB drive, XP report can't copy, can't read file I believed. I turn off dock, restart. Now the drive...

Hi BadBigBen, Your fix did the trick. PC is back to normal now. Thanks a million.

Thanks for your help. It's a slow laptop for sure but it becomes much slower after the incident. The burning software is Nero old version that was install before the drive change out, it's a Compact DVD which reads disc fine. I upgrade the RAM to 1G before this also.

I have a Dell iInspiron 1300 with 1.3 Celeron M Win XP Pro. I changed the DVD drive while the machine is still on! Now, it take a long time to bbot, it runs very slow. I checked task maanger the CPU run at 100% a lots of time with either AVG * or system idle in process, no program run on...

I ask a question about printing before and appreciate all the help. The recommendation is to set IP to static for the printer. I tried that with the router but still having problem. Turn out that with Brother printer you set static Ip via the printer itself. See quote below. I was able to...

One more thought. I can turn DHCP off and will that make all IP already on the network static? When I have a new computer or visitor, I can just turn DHCP on again. I try this and the printer printed but I will wait and see. Thanks.

Thanks for all the explanations. What I tried to say is that I can use BRAdmin program from Brother to change the printer IP. But will that make the changed IP static and the router will know that and the other computers will know that also? I can not see a way with this Belkin router to set...

I need to clarify the problem here. I have not assigned an IP to the printer yet. The DHCP does not show the printer IP at all. But my main question is if I assign an IP to the printer from one computer then all computers on the network will see the printer throught that IP and I don't have...

Thanks for all the replies. I'm confused here. I believe I can assigned an IP to the printer using BRAdmin tool. But how can the router know that the printer is at that IP. When I look at the router and have it listed all the IP of connected computers, etc; it did not show the printer IP...

Thanks but my problem is how to assign to IP to the printer from the Belkin router. I can't find a way to do that form the Belkin manual.

Thanks SlimJohnD. The method you showed me mean that all computer, devices connected to the Belkin have to have assigned IP so DHCP will need to be off. I think it will cause me more headache. Is there a way to assign a static IP to the printer only?

Hi Cdogg, I can find the MAC of my printer in the BRAdmin program. Can you advise me with assign an IP to that MAC from the Belkin. The I can try to change the IP of the printer with BRAdmin. The Belkin IP pool start at 2 and end at 100 for DHCP on. Thanks.

Hi, I'm back. The printer works for a while then won't print again. I download Brother BRAdmin program and it showns the printer at 192.168.2.3. My Belkin router F5D7230-4 does not show the printer at all when I logon via IE. I think I can change the IP with BRAdmin for the printer but I can...

Thanks for the help. I also have Vonage which I used their wired router as an extension for more ports. After reading the replies, I route all my C5 wires out of the Belkin, the problem resolved. I was thinking of a static IP but am afraid of conflict once I set the printer to one. I have...

Hi, I have a Brother printer, model 2070N. It wired to my wireless Belkin router for 3 computers on my home network. It works fine until a month ago when I can't print. I can't ID what's new when the probelm started. When I repower the router and one computer it will work but then stop after...