Search results for query: *

I have Offline Files enabled on a folder on the network. While still connected to the network, when I try to access a file, sometimes it opens with "Read-Only". The file is NOT a read only file and this only happens occasionally. If I disable the Offline files, this does not happen anymore. Any...

I tried adding the Static Route to the new IP and then when I tried to change the internal ip, I get the following message: Cannot remove route entry because it does not exist.

I am also new at this so bear with me!! I want to change the inside IP address also. It says above that I also need to change the nat statments and access-lists. Can I do this on the PDM? If so, do I change the NAT under Configuration-Routing-Static Route? What about access lists? Where do I...

That didn't work. Basically, we created a VPN from out site to another site using Cisco PIX Firewall. When we ping the remote site with a workstation here, the IP address is translated to the server IP address. NAT is enabled on the PIX so I want to disable NAT on the server. Is this possible?

I will try it. Thanks!!

Yes, I would like to disable translation for specific sites.

Well is there a way I can disable NAT to certain addresses?

2000 Small Business Server Is there a way to disable Network Address Translation?

2000 Small Business Server Is there a way to disable Network Address Translation on ISA?

Update: Small Business Server 2000 ISA 2000 with Proxy enabled Cisco PIX Firewall 501e We are trying to setup VPN with another site with Cisco PIX but running into problems with ISA. I can ping to the other VPN site from the server and the workstation. The problem is that when I ping from the...

Small Business Server 2000 ISA 2000 with Proxy enabled Cisco PIX Firewall 501e We are trying to setup VPN with another site with Cisco PIX but running into problems with ISA. From the server, I am able to ping the other VPN site. I cannot ping the VPN from a workstation. Workstation IP is...

I am trying to connect to a Citrix Server but ISA is blocking it. I opened ICA port (1494) but still cannot connect. What other ports do I need to open? Thank you!

If I do disable "deny any ICMP", what will that do? How do I check to see what ports are open and closed?

Yes I am trying to connect to a PCAnywhere host outside from inside. I noticed that if I delete the "deny ICMP", it works. However I do not want to disable that.

PIX Version 6.3(1) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname hostname domain-name domainname.com fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http...

Ok, I added the two lines but still cannot access any hosts outside of our network using PCAnywhere. I added: access-list inbound permit tcp any host 172.xx.xx.xxx eq pcanywhere-data access-list inbound permit udp any host 172.xx.xx.xxx eq pcanywhere-status I used our public ip address...

Thanks. I found out that the PTR record is resolving to the wrong IP address. I am having my ISP change this. Thanks for the info!!

We are running an internal Exchange server. How do I do that?

There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. <domainname.com #5.5.0 smtp;554 This server requires PTR for unauthenticated connections.> I am getting the above NDR message when sending to a specific domain. We...

So if I add the 2 lines, this will enable connection to any pcanywhere host outside of our network? Do I have to specify the host's ip address?