Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: pcasi
  • Order by date
  1. pcasi

    winfiol for aastra/ericson MD110

    FYI you don´t need WinFIOL or FIOL to access the system, any terminal emulator like Hyperterminal or PUTTY works.
  2. pcasi

    Mobile extension

    I think i´ve seen that feature on Ericsson MD110/MX-ONE PBXs, that is carrier dependent. I know for a fact that it is/was available on Spain by Telefonica, also in LatAm by Movistar/Telefonica. UK was also a market for this feature but i don´t know which carrier, if any, offered it.
  3. pcasi

    Isdn route mxone tse and tsw

    It's been a long time but D3 of VARO should not be the same at both sides since one of them should be Network Side and the other one User Side. Try changing VARO on one of your systems to 06110000, 06310000, 06510000, 06710000, 06910000, 06B10000, 06D10000 of 06F10000. Also i think D3 of DERV...
  4. pcasi

    we are facing issue after disabled some lines

    Then there are still faulty lines connected to your system, you should identify them and dellete them with ROEQE
  5. pcasi

    Erase NIU2 EIC

    As you said, it's been a long time. As I remember you had to upload a modified version of the NIU R6A firmware to trick the board into thinking it was a NIU (SCSI version) and then you used the same commands as in the regular NIU. Then you needed to upgrade NIU2 to its regular firmware.
  6. pcasi

    pbx md110 red led lit on lpu5

    Either LSU or LPU5 need to be replaced in LIM 2. Try first with LSU.
  7. pcasi

    SNR External Mask

    There is a Service Parameter in CUCM "Display Original Calling Number on Transfer from Cisco Unity:" you should set it to False and see if you get the behavior you want. Be careful it may break some other stuff.
  8. pcasi

    Pickup Group

    Have you added the pickup group to the hunt pilot config?
  9. pcasi

    Vlan tagging on 3102 phones .

    Yes, you can have both ports on different vlans, but the configuration is done on the switch. Voice vlan is tagged and data port untagged, then on the phone you set the vlan setting to the tagged vlan and its done.
  10. pcasi

    Jabber outbound call not connecting

    Have you run a Diald Number Analyzer test? That should give you a good idea of what is going on.
  11. pcasi

    Supervisor Desktop 10.6 - Agents Disappear and Reappear

    I´v seen that issue related to Norton Anti-Virus, but i think it could also be caused by any other AV suite or as NECPBX says a Firewall.
  12. pcasi

    642-437 - Implementing Cisco Unified Communications Voice over IP and QoS v8.0 (CVOICE v8.0) - ??

    Did you obtain any certification with that exam? (CCNA Voice or CCNA Collab) The 3 year rule is for completed certifications, if you only approved that exam and did not get any related cert it expires after a certain time (Exam lifecycle). It happened to a friend of mine who was one exam short...
  13. pcasi

    Options for PRI gateway for VCX?

    We´ve used Epygi Quadro E1/T1 gateways, and they work great with VCX. Don´t know how much cheaper they are compared to Audiocodes gateway in your area.
  14. pcasi

    Good way to cram for a CCNA 640-802? Need to stay motivated!

    As for online resources i would recommend Jeremy Cioara CBT videos. Another option would be to take the CCENT exam wich is the basics for CCNA and is half the price of it, that way you get used to the way the exam is and if you pass it it would boost your confidence towards the other half of...
  15. pcasi

    ELU34 in Stack in combination with RG5DC

    There´s no problem in using both boards on the same mag, we have several combinations of them (ELU34+RG5,PU4,PU5 in Stack and /50) and it hasn´t caused problems.
  16. pcasi

    NBX3000 Dialplan issue

    Hi dan, Check if incoming pretranslators are tied to the remaining PRI lines. Also there´s a "Test" function at the Dial Plan page so you can test and troubleshoot the pretranslators. Hope it helps.
  17. pcasi

    GJC is present

    If you are not using GS, GJUL boards should be placed on the same MAG and BPOS on both LIMS, i.e.: LIM1 GJUL 1-1-00 connected to LIM2 GJUL 2-1-00 Also check your command syntax, if you only have 2 MAGs on LIM 2, BPOS 2-2-00 is not a valid position, i think the command should be...
  18. pcasi

    One doubt - SIP

    It would be best if you set up a VPN client from your computer on the internet and after the tunnel is established you can open a SIP client session to MX-ONE. As far as i know there is no way to assign 2 addresses to IPLU.
  19. pcasi

    Win Fiol connection speed????

    If you are using IPU as access card you can use up to 9600 bps, but if you use NIU/NIU2 you can go up to 38400. The only improvement i can see is when you are obtaining PC-Regen print commands, the data prints faster and it saves a lot of time.
  20. pcasi

    Cards attached to phone sets?

    Another idea i´ve seen implemented at some sites is placing a mirror so the agent can see him/herself while talking on the phone, the managers at those sites said it has improved customer service because when you look at yourself you have a nicer attitude and that reflects on the sound of your...

Part and Inventory Search

Back
Top