What you trying to use it for, if its a divert then just short code, if its just a DN to be used as an extra number on one or more sets, create a user with no extension assigned set the number and the password in the supervisor settings so it doesn't complain about not having an extension...
If you no longer have PRI in 16-0 you could just remove it
LD 96 dis the msdl/tmdi depending on what it is
LD 60 dis the loop associated with 16-0-7 if its not already (if you don't know the loop number LD 22 and prt the cequ)
LD 60 dis cc 16 0
Ld 73
REQ chg
TYPE ddb
MGCLK x16 0
LD 14...
trace it see if the call is being sent to the carrier and then you will know if its barred by the pabx or the carrier.
Another way if its carrier is to enable the redirecting number in special features, thats what we had to do for our carrier as they white list the DDI range but if there is a...
So looked at the support page and the tech bulletins for
11.1.3.2 are in the link below and worked for me
https://support.avaya.com/css/public/documents/101091047
11.1.3.1 also worked for me
https://support.avaya.com/css/public/documents/101088477
Deployment document (Part 9 is about...
Good stuff, its quite often the issue with TDM to IP issues, often missed when its PRI trunks and IP phones, people don't think about the bit in the middle.
So for the IP Phone to get to the Digital phone it needs to pass through a DSP for the IP/TDM conversion, I do not see a DSP in any of the traces, only the IP of the Phone.
Try LD 20
REQ prt
Type vgw
got any?
Are these normal MG1000 boxes ? if so can you post
LD 32
stat 0 0 0
stat 0 0 11
Also can you do the same trace back the other way (entc 200 0 01 01 100, gotr) and call the digital
reason I use the manager is we have AIWS2 / IPBS2 / IPBL and versions in manager are 4.12.0 / 11.5.20 / 11.5.20, I was not finding the same on Avaya Support site.
yes also the VM and the physical server, all no good. We have a 10.2 SMGR for all the Avaya Red so just planning to move the few remaining CS1000's to that and decom this server instead.
Have a 6.3.17 SMGR looking after a couple of CS1000's and session managers, everything appears to be working ok (some pages not as we don't allow flash player)except for the Log Viewer page which is not showing any logs. It was working but we are not on it often, recently we did do the Root CA...
did a fresh deployment of R12 OVA on VMWare and logged in with Administrator, tried to use nmtui to update the network to match in with the customer network and doesn't seem to work (won't save). Tried to su to root and default password not accepted
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.