Search results for query: *

FXO is being used as trunk lines are in a different location

SIP is not converted to analog; it stays as an SIP Trunk.

I have a NEC SV9100 which has to be connected to a 8 Port FXO unit. - The FXO unit It has 8 ports, currently I have connected all 8 ports to one SIP trunks and I can receive & make calls, however I want to access and receive calls from individual port. Eg 1st Port is SIP trunk 5 2nd is trunk...

A power supply has to be attached to the DSS console , when powered up go to DSS console option and add to extension number

Can anybody confirm if 5300 series phones can work on the system or only 6800 & 6900 ? I really appreciate any help you can provide.

Help is required on account of CLIP from Analog lines. I am from India and CLIP received is in form 1123456789, A.) The total number of digits is 10 and the last 8 are required. It is required to remove only the 11 because when we Redial it also dials 11. I have added 11 in 20-19-08...

Is mitel 470 a end of life product?

agreed it is a breeze how ever the situation required Ver 4!

I am creating a cluster for Redundancy. After logging into ICT I create two servers, add two server to a cluster. However when I press enter to start installation I get " Cannot ping IP add ..." The IP is of the Standby Server IP. What am I doing wrong?

I am having an issue with mxone ver 5 Qsig with alcatel. I can make call from mxone to alcatel. I can make a call from alcatel to mxone, the phones ring, CLIP shows however whenever I pick a Digital / Analog phone in mxone the call drops immediately. What all issues can I look,for a pointer...

I have license, however error is still the same however it is accepting dir=xxx...yyy.

vmgei:ifcind=1,grp=2999; NOT ACCEPTED WRONG EXTENSION TYPE

I changed IFCUI as above, but have not done VMGEI will do so and see. Are all the others correct? In the asterisk kindly confirm if I have to make a extension or custom extension or ...2999 Appreciate ur reply

MX-ONE rocap:rou=100; ROUTE CATEGORY DATA ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP 100 7110000000000010 4 3110000001 0 30 128 00151515 1111111000A1 001100 rodap:rou=100; ROUTE DATA ROU TYPE VARC VARI VARO FILTER 100 TL66...

yes license is required for sip trunk, IPLU for non server based

gguillermo :) I need some help to use asterisk as a voicemail system to MX-One can u help?

Appreciate your reply! The system is as follows: MX-One <SIP> Asterisk VM I had done this-> CDINI dir =2001,div = 772001 which diverted the call to the 2001 VM Box as required, now I am trying to figure out how to get the MW key indication to work. This is what I have done so far...

So How do we do it. MX 0 One is at 192.168.1.200 rou of asterisk is 77 Asterisk is at 192.168.1.253, presently both can call each other. vms number us 224 If I do CDINI.dir=2001. div=77224 If is dial from 2200 I get the vms of 2200 from the asterisk not 2001 as expected. Is their any other set...

Is it possible to connect Mx-One with an external Voice Mail Box say asterisk?

hi, With PRI and SIP I have already done, what I need to know how to activate the MWI etc. regards