Search results for query: *

hi everyone, Thanks, guys, for helping me on my issue, we bought new hdd with build-in software from local supplier of Mitel and the system working properly. Thank you all for support. sadic

Hi Everyone, Here is the capture of booting sequence. I see that booting failure is in DM. Is there any way solve this issue

Dear Everyone, Thanks for your help on my issue, I'll will try first to connect RS-232 in maintenance port to watch it boot

Dear Everyone, I have an issue on my 3300 MXE III it won't boot up and the LED shows like this Your reply is really appreciated. sadic

I found the solution in Device Capabilities

thank you Billz for your replied, I found already solution for the problem Thanks again

actually yes, I can dial any number for outgoing via SIP TRUNK but when press redial it won't work, for analog no issue. In my system options for the Last number redial source is All Calls

Dear all, I have MiVB 7.0 MXE III and my issue is on 5312 IP Phone can dial out but once you press the redial in wont work but in analog they can redial the number. What is the possibility wrong in my program Your reply is really appreciated Sadic

how you do that, I want my sx200 EL expand the user to 330 right now is only 190 user

better you check your ars and class of restriction

Thanks for all your reply, my issue was resolved. The cause of problem is from TELCO vendor. Thank you very much for your support. Sadic

its fast busy and it is invalid on the phone screen

Hello Everyone, I'm newbie installation of Sip Trunk for 3300 ICP version 43.0.1.16. My issue is there is no outgoing but I have an Incoming. I've done configuration for COS for sip trunk, trunk attributes, route as, digits dialed, and last for sip peer profile. Your reply is really...

Dear all, I have a sx-200 EL LW19, is there a possible to increase the user devices from 192 to 336. Any idea I really appreciated your help. Sadic

Good Day Everyone, I have a problem with the AX controller ICP working software 38.0.8.10 that when it shuts down and comes back up, it doesn't read the other card installed but its program still exists. There is also a time when the system is powered off, once it is up it returns to the...

Thanks nytalkin...

Hello Everyone, Can anyone tell me how to change the IP address of the system 3300 AX Controller. The present system server IP Address is 192.168.1.2 and the client want to change this to 192.168.1.3. I really appreciate your reply on this. Thanks.

Hello everyone, I have to change the ringer of my Primary greeting set in Voicemail to one ring only, as of now the voicemail has 3 rings to answer the greeting. I change the Class of service of voicemail call forward no answer timer but it doesn't work. I really appreciated for the reply...

hello guys, As I read your forums we are using 3300 ICP AX controller with version 8.0. Today we cannot access the system thru IE and FF and it says the certificate was already expires.

Thank you very much for kind reply nytalkin