Search results for query: *

CP card? If I open the nortel I could see the modules? Is it possible the module went bad?

Elementary question: Where are the memory modules at? Is this referring to the CCR board? I don't see any errors on the cards? Is there a command to find out what cards are messed up? Thanks so much!

My system is acting real odd. Routing calls to different places, dropping calls, and some other features. I see this error: BERR202 SIMM 1 0: Parity error at addr=0x88db1f0(local) reseat the specified SIMM I assume I have a memory module messed up? Replace or reseat?

Also, it's a merdian max mail system.

Is it possible if a person has 2 different extensions (not a rollover) to access both voicemail boxes from one account or do they have to access both accounts separately? Thanks again, Will

After it is saved how does the person dial the number again? After you press the same button it again asks for new programming.

I have no real manuals for this meridian 81c, but I assume there is a way to put a speed dial function on one of the buttons? I know it's not on the programming feature on the phone itself, but rather a cls feature? P.S. Thanks for everyones help. I've learned so much in a really short time.

How do I change a phone from AGN to a SPV (supervisor) phone? This will allow for the OBV (observe) feature too? Thanks!

NACT REQ: prt TYPE: tnb TN 012 0 4 4 DATE PAGE DES DES 2W139 TN 012 0 04 04 TYPE 2616 CDEN 8D CUST 0 AOM 0 FDN 6176 TGAR 1 LDN NO NCOS 5 SGRP 0 RNPG 0 SCI 0 SSU LNRS 16 XLST CLS UNR FBD WTA LPR MTD FNA HTA ADD HFA MWA AAD IMD XHD IRD NID OLD VCE DRG1 POD DSX VMD CMSD CCSD...

I do know how to long into the PBX, but am stumped on this issue. It's a weird hold message and it makes no sense why it's there.

How can I check the TNB and the SDN table?

First off, I appreciate everyone's responses as they have all been very helpful. I have an extension 6779 that at one time I'm sure worked; i.e. user had a password and greeting and checked voice mails that were left for him, but now when calling the user at 6779 the number rings to him and then...

I am looking for both the boards and the half chassis. I assume the stuff isn't all that expensive, but I know antiques can be quite a bit! ;)

I'm looking to replace some equipment in my Nortel Meridian 81c, but am unsure where to find parts. Looking for a CCR card for an 81c, but I realize this stuff is obscure and not easy to find. Any ideas? Thanks again, Will

Any thoughts on the following: ovl429-overlay conflict I get this message anytime I try to change something in ld20. Thanks,

I have a feeling my CCR box is going down. I have tried changing the VRT sessions, but have had not luck. I really need to find what's routing where and login to the box, but just get garbage anytime I try pressing any keys. Any thoughts?

I noticed everything is up. Any way to see when the last time this system was rebooted? Also, does it sound like Meridian Mail or CCR is toast if CCR is forwarding a call and the call is going nowhere? Thanks!

Working on a Meridian 81C and having issues with calls being routed to a dead voicemail box. 800 Numbers originally routed fine. I am told that CCR is not routing correctly to Meridian Mail and this may need a reboot, but I have read that this reboot could in fact kill this system. Is there a...