Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BERR202

Status
Not open for further replies.

phinneywill

Technical User
Sep 20, 2008
18
US
My system is acting real odd. Routing calls to different places, dropping calls, and some other features. I see this error:

BERR202 SIMM 1 0: Parity error at addr=0x88db1f0(local)
reseat the specified SIMM

I assume I have a memory module messed up? Replace or reseat?
 
might as well split and reset mem, as a card reseat would be in order anyway.

Mato' Was'aka
 
Elementary question:
Where are the memory modules at? Is this referring to the CCR board? I don't see any errors on the cards? Is there a command to find out what cards are messed up?

Thanks so much!
 
this is referencing your CP card in the core, the simms are slotted on there.

Mato' Was'aka
 
CP card? If I open the nortel I could see the modules? Is it possible the module went bad?
 
what kind of system you talking about? If it went south, you would lose dialtone, at least briefly, you have a redundant system?

Mato' Was'aka
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top