Search results for query: *

I was just trying to get a bit more elegant solution then doing all the seperate CD players. And I have the PC(s) to do it and not that many portable cd players. I need a total of 5 "zones" if you will, 5 seperate sound files playing when triggered by a seperate device, which is a topic not...

Thanks for the help John, unfortuantely I can't get any other IP's from the 7 remote subnets. The 10.96.103.68 is all I've got to work with. Would you happen to have any examples of this? Bryan

Greetings all. I have been working w/ PIX other misc firewalls for a while but this is my first more complicated setup on a Netscreen. What I need to do is get a Site-Site VPN tunnel up, which is pretty easy, but... I need the tunnel to make use of 7 different subnets on the other side going to...

Thanks for all the help. I'm still researching how we are goin got go about this but there are some very good suggestion s here. Just wasn't wanting to do some heavy audio mixing but then again nothing that's worth doing is ever easy. Thanks again, Bryan

Greetings all. I am involved in quite an elaborate Haloween display for my city and have been tasked the job of sound coordinator. I have quite a bit of computer/server/PC experience along w/ sound/audio/home theater experience so I am not new to this by any means, just not much experience at...

Thanks for all the help guys. I was able to convince them to use NAT to protect their non-critical servers even further.

PIX-525-UR-BUN w/ 6.3(3) Thanks in advance, Bryan

Long story as to the why, but ISP and client have made the situation to arise. Customer connects to ISP via ethernet: Internal-->PIX-->ISP-->internet Does anyone know of a way to have both the inside and outside networks on the same subnet? I know this isnt the most secure and it disables...

Hi all, I've goto a need(it's a long story) to connect multiple interfaces to the same subnet. In addition to that, I need to have mutiple subnets per interface available on different interfaces. i've got Briging configued w/ BVI's and I know I need to assign each interface a bridge group...

for reference this is the doc I've been using: http://www.cisco.com/warp/public/471/50.html I have dip settings one, four, six and eight down and all others up. I've given the modem strings: at&f0qle0s0=1&b0&n6&u6&m4&k0&w to which it responded w/ "OK" I can dial into the modem but I get no...

Hi all, I know this is a subject that has been talked about quite a bit but I can't seem to find anyting either on cisco or on this site that fixes my problem. I have a Cisco 7206 w/ I/O-FE and NPE-225 running 12.2.23a code that I'm trying to dial into remotely via Hyperterm and a modem...

Yes, that should work.

Ok, here's the latest, which doesn't look like it has changed. crypto_isakmp_process_block:src:x.251.175.234, dest:x.231.38.11 spt:500 dpt:500 OAK_MM exchange ISAKMP (0): processing SA payload. message ID = 0 ISAKMP (0): Checking ISAKMP transform 1 against priority 1 policy ISAKMP...

Hi Mohamed, I have done that at Dopeheads recomendation, still having probs though. Bryan

I think what he means is that he wants his 3rd int/group to be able to ONLY ftp to the 6th int/group. Should be as simple as: access-list blah permit tcp <3rd int ip> <mask> <6th int ip> <mask> eq ftp and do the same for &quot;ftp-data&quot; apply this to the &quot;3rd&quot; interface...

Nope, still no dice. I still get the same &quot;att&quot; erros. Bryan

crypto_isakmp_process_block:src: x.251.175.234, dest: x.231.38.11 spt:500 dpt:500 OAK_MM exchange ISAKMP (0): processing SA payload. message ID = 0 ISAKMP (0): Checking ISAKMP transform 1 against priority 1 policy ISAKMP: encryption 3DES-CBC ISAKMP: hash MD5 ISAKMP: default group...

Ok, so i changed the acl's to be only private to private for all the ipsec configs but I still can't connect. I can establish a tunnel but then I get the following message on pix1: VPN Peer: ISAKMP: Peer ip:x.231.38.11/500 Ref cnt decremented to:0 Total VPN Peers:2 VPN Peer: ISAKMP: Deleted...

Hello, I have a Pix to Pix IPsec tunnel up and would like to add another but am having problem. I have what looks like the correct config on each side according to cisco but it still isn't working correctly. Tried searching through the forums but didn't quite see anything that would help me...