Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. doeswhat

    How to determine digits sent and recieved.

    Our hospital is replacing their NEC NEAX 2400 IPX, and I have been requested to find out the number of digits we send and the number that we recieve through our PRI's... I contacted the circuit provider but feel nervous about his answers because there were alot of ummmm's and hmmmm's followed by...
  2. doeswhat

    Dialing an extension as soon as phone goes off hook.

    Yes, thanks much.. I new about setting the TEC to 14 for the hotline, but I had completly forgot abou the AHLS command, and BAM!!! all is good. MERRY CHRISTMAS!!!! I am assuming its still ok to say that here !
  3. doeswhat

    Dialing an extension as soon as phone goes off hook.

    Alright, short of making an extension a hotline to dial to the operator, is there another way to make an extension to automatically dial another extension when it goes off hook?.. (that is not the operator)... The system is a 2400 IPX. Thanks for any help.
  4. doeswhat

    Is an IO card hot swappable in 2400 IPX?

    Ok, now another simple question.... Is the IO card hot swappable??... school has been way too many years ago....
  5. doeswhat

    MAT connection issues, 2400 IPX.

    Thanks much... I have subsequently swapped to a new pc and am getting ready to replace the IO card...
  6. doeswhat

    MAT connection issues, 2400 IPX.

    Hello all... I am unable to use the MAT to connect to a 2400 ipx... When I try to login, it gives me Read/Write error occured... The customer says that they recently had the power in the building go up and down several times in a row (this would not cause issues with the pbx, its backed up) so...
  7. doeswhat

    Hunt Groups for univerge ipx 2400

    I am going to have a mixture of analog and digital phones at a new facility that is connected to the NEC system here(univerge ipx 2400), and they are going to have a "pilot" number that they want to ring all extensions at the same time.. I know that I am making this harder than it is, but can...
  8. doeswhat

    Changing to PRI trunks on NEC IPX2400

    Its been 11 years since I have had anything to do with trunking an nec 2400, this one is a fairly new ipx2400, and they are changing everything over to 2 PRI's. They currently run everything over copper lines, and have DID's coming in through 8tltr cards, these will all be shifted over to the...
  9. doeswhat

    2400 IPX/AD40 message lights wont stop blinking

    I finally got fed up and busied the cards, pulled them ( all the elc cards) and reseated them, and that cleared the lights..... go figure... thanks for the reply
  10. doeswhat

    2400 IPX/AD40 message lights wont stop blinking

    Recently had an AD40 go bad for unknown reasons, and customer replaced with a Duvoice 2000 unit. Prior to replacing, the AD40 still worked, but after whatever happened happened, if you had messages, your MWI and Glass button lights blinked with or without messages, and if you did not have any...

Part and Inventory Search

Back
Top