Search results for query: *

Hi all, This subject was slighly covered in other topics but not worked for me. I have an IP403 with 3.2.53 firmware on it and voicemail pro latest (suited for this firmware). A call is first presented at a hunt group (group mode) with 3 members. Normally users will put themselves to 'do not...

Thanks, Did some more tests and it seems to occur mostly to the GSM gateway (trunk based PtP) SIP re-invite is ticked but the issue doesn't occur on my SIP trunks only on the SIP/H323 phones itself. Local tones should be correct since i don't have this issue on all other phones right?

Hi all, I've got an issue with h323 and SIP phones to get a dial tone when outcalling. (ex 4620, 4621, Kirk DECT SIP..) The number is pressed and gets dialed but there's nothing more than silence until the other sides picks up. All other digital phones (ex 6408) do not have this issue (all same...

Thanx, I'll try this tomorrow and let you know Cheers

I've got 4 location registered at a main site. On the main site there is an IP500 with a SIP line and a BRI line. The SIP line has got 2 diffent numbers At location 1 people dial out from the BRI line with number 1xxxxxxx At location 2 people dial out from the BRI line with number 2xxxxxxx At...

There is special H323 firmware loaded into the device and avaya ip office doesn't support sip endpoints only H323

.... and the licences are valid

Yes i've got 2 3rd party IP Endpoint licenses...

Hi there, Since the other thread about the AudioCodes is closed, I would like to re- open this one in a new question. I have a H323 AudioCodes MP-112 2 FXS extension to connect 2 analogue phones to an IP Office IP500 at a remote location. The 2 locations are connected via a LAN to LAN...

Anyone known with this issue yet?

Hi there, I have now 2 systems with the same problem; hope you can help. One of the systems is a 406V2 running V 3.2.5 an embedded vm card; the others IPP500 running 4.0 with VM lite. The problem is when recording an announcement or a Queue message AA the message is stored on the card / pc for...

Hi there, A custmer wants to see the number of call waiting calls, the called the've missed and the number of free lines on a big tv screen. Well i don't have a problem with the tv screen, but only whit the problem witch can show this information. I'm using CBC right now. Only with this...

THnx, But I also can't use the voicemail lite version because I haven't got a workstation available to run the voicemail lite programm. In the first place i'd like to hear an own recorded message when i shift in to night. But it just don't work. any other ideas? greets

Hello everyone, I've got a problem with the integral card on an ipoffice SoHo. I programmed a button to switch group "1" into nightshift. into this group I created a user "reception" . In nightshift this group is redirected to group " night" . Ther are no users in the "night" group; but the...