Search results for query: *

Thanks so much for your advice. We had the circuit cutover last Friday afternoon. Apparently TPAC brought in cisco router and need to connect directly to the DS1 bypassing csu/dsu. Unfortunately, it needed a cross-over cable. I was able to make one right away and the circuit was able to sync...

i mean the b channels settings and 24D.

Syquest, you said, "You also need to verify the B channels to make sure you have 1B - 16B & 24D" how do i find this thru winspm?

Yes even with ATT now, we have main number as DID for all outgoing calls...so that's ok. no we dont use t/r ports for Fax/modem. however adtran has 8 ports for fax lines and they say it will only work for fax machines and not modems. For legend programming i have it connected to a virtual...

they are providing us 4 integrated T1(6meg), voice with 16 channels and the rest for data thru the adtran 908 box.

I just found out from TP that they will be using adtran 908 at our mpoe. http://www.adtran.com/web/appmanager/portal/Adtran?_nfpb=true&partNumber=4212908L1&productGroupId=107&selectTab=featuresAndBenefits&_pageLabel=waverunner_page_products_productdetail any thoughts on this?

syquest/touchtonetommy: need to find out if there is a way to use 799 (intercom) from an outside line to broadcast message.

Yes you are right never done one of these. i thank you for all your pointers. all DID are the same porting to TP. PRI protocol to TP: no I will ask for CSR.

ok if it is E&M T1. good to know. i have no idea. ATT told me PRI so i take it as that. If Telepacific tells me that their circuit going to be PRI, we will have to wait and see. ok i will search for Legend initial pri setup. thank you touchtonetommy. i know i will still seek your help.

The current existing circuit is PRI with ATT.

I did a print out for T1 & PRI. nothing on PRI info. see below for T1 info: DS1 slot Attributes Slot Type Format Supp Signal LineComp 5 T1 ESF B8ZS Rob_Bit 1

thank you Syquest & TouchToneTommy for your quick response. it is PRI and not T1. We haven't changed it yet and still pending for local ATT to install the T1s to the premise. Switching to Telepacific. Please let me know from winspm what i need to print out so i can post for you to help me to...

Currently we have 24 trunk lines for PRI from line 817(T1) to 840(t24). we are changing the telco and will reduce to 16 channels. What will I need to do for this change?