No, it doesn't play its happy little tune and I don't have any back up files.
Are Keycodes required for its most basic operation (AA, CCR, voice mail)?
Where would I get a replacement HDD? Any idea of the cost?
Has anyone ever tried cloning a working system's drive?
Thanks for the replies.
I believe its a 4.1, but it won't successfully start on the phone system, so I can't really tell. Is there another way to determine that?
I have connected a monitor, keyboard and mouse to it. It had a dead BIOS battery error, so I replaced the battery.
Most of the time...
I have an application module which is no longer working.
It is NT5B74AABJ REL 07 MOD V3G.
The fiber connector light on the Media Services Base Interface Card doesn't come on.
There are no PCMCIA cards installed in the interface card.
Are there supposed to be for it to work?
Thanks.
Yes, I found that thread as well, but I am missing the power supplies, so the color code is irrelevant for now. I need to identify each pin's function.
I have already identified the power (pin1) and ground (pin2).
There are 2 voltage regulators inside, one is +5V (7805) the other is adjustable...
I recently acquired two PolyCom Soundstations, but no power supplies. One unit is 2201-00106-001-H9R the other is 2301-03322-001-N. Does anyone know what the conference unit pinout is?
Can anyone tell me what the Integrated Data Module 200 (NTBB43FA-93) is for?
How do I use it, and what can I do with it?
Is specific software required?
Thanks
Can anyone tell me the wiring pinout for a Norstar Analog Station Module (ASM M0X8A)(NTBB51CA-93).
Is it the same as M0X16 station module (from 1 to 8)?
Thanks
I found that I could only access F903 one time, so I crossed my fingers and shorted the capacitor. I could then access F903 again. I accessed **XFTEST, clear the codes and re-boot the Startalk. Then I was able to access F983 and enter the config password. I was again shown the serial number...
I checked the status of each port and their B2 channel; all IDLE.
I was able to use 903 until I tried **XFTEST.
903 is now "inactive feature"
**XFTEST replies:
F915: E8030201 INACTIVE
F980: E64F594C INACTIVE
F981: E64F5953 INACTIVE
F982: 564F5941 INACTIVE
F983: 564F5944 ACTIVE
F985: 564F5958...
I have a StarTalk Flash running v2.1 with the 4 port expansion module.
All of the features requests (F980, F981, F982, F983, F985 etc.) reply "Inactive Feature".
When I dial the DN of the first port (in my case 243) I get a "Busy" reply and tone. When I dial the second (in my case 244) I am...
Thanks for the reply,
I may have been unclear.
My question has more to do with the StarTalk itself.
Never mind the KSU for now,
Is there any limitation to how high a version of software feature card (1.5 to 2.0) I can put in my Startalk (NT5B06ED-93)?
Or is the Startalk itself, compatible with...
Are there any compatibility issues with Startalk Flash and either Feature software ver. 1.5 or ver. 2.0?
Does it matter what model or version of Startalk I have?
My Startalk is NT5B06ED-93.
Thanks
I want to test my AA and CCR before enabling it on the lines.
I have an ATA on a station port and the analog side connected to an unused trunk (line 003). The AA answers line 003 and I can hear my menu prompts.
From my stations sets I can't transmit the tones necessary to navigate thought the...
I have a Nortel C200 Companion (C200a CT2 UK) system with very little documentation.
I can access the:
Configuration menu Fr**0
Administration menu Fr**9
Startup menu Fr**1
The system also accepts Fr**3 but I don't know what this menu is or what the default password for this menu is.
Does...
Thanks for the info, I inserted the wrong link into my earlier post.
The thread that talks about building flash cards is
http://www.tek-tips.com/viewthread.cfm?qid=846348&page=368
Also, what do you consider "cheap" for a 2.0 card? My concern is, this state of this unit is unknown.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.