Search results for query: *

It is a very old one, it could be time to look for a newer system.

Your theory was right. I was just going to fast. Now it's eliminating what's causing this phone to short out the system. You are the man!!!!

It worked for a little bit. I had already replaced the board. I think it may have something to do with the contactors or back plane, but thanks for eliminating possibilities for me.

The other day one of my extenstions went out. The next day 4 more did the same. I replaced board, but no luck. I am on release 7 of a Merlin System. Do I need to reprogram or how do I get it to release these extenstions. They all ring busy.

Thanks for the info what type of ups should I purchase for this system?

It looks like the power supply keeps going out on my system. Is there a battery that can be replaced or should I replace the power supply or could it be something else?

I want to thank all of you! I've got everything on, and working as it was before. The programming was easy once I got started. Thanks a lot!

Thanks Franke. I ran into another little block. Password for remote. Is there something that comes standard with the system like 1234?

Yes. That's why I think there is something wrong with the adapter. I had an adapter prior to this and was able to access Dos SPM. But since I got this one, I've never been able to access the system.

They have the merlin dialtone. But as I said I can't get in to Program. SPM 5 says not connected. I tryed to dial in remote/local. That is why I was using the 8th port. What port should I be using to dial in with a modem?

Replaced power module then erased system by taking jumper off. Version 5 of Legend programming says use the 5th port from the top on 012 module. Still working on getting SPM to connect with system. Think my Adapter could be bad.

I HAVE THE SPM SOFTWARE BUT THE CURRENT VERSION/MODULE HAS ME LOCKED OUT. IF I CAN GET THE NEW MODULE TO POWER UP THEN WE CAN REPROGRAM IT. THE BASIC THING IS THAT THE PAGE CANNOT BE ACCESSED FROM BASIC WALL/SHOP PHONES. SOME OF THE OTHER STUFF I'VE WORKED AROUND. BUT FOUND THE POWER...

Thanks a lot, I will check the power supply and if that is not the problem default it. I've also located the manual and am dillegently going through it.

OUR SYSTEM BOARD WAS DAMAGED DURING A STORM. IT WAS RECOMMENDED THAT WE UPGRADE TO LEGEND 7.0. SYSTEM GOES OUT AFTER CYCLE. BOARDS IN SYSTEM 408 (NO GS/LX) JUST 408, 400, 008, 012 - NONE HAVE INITAL BEHIND. DO I NEED 408 GS/LX BOARD?

I purchased a Merlin 7.0 board for our system and can't get it to cycle up. Original system was Merlin II. We never needed any digital board, so I don't have any. I have a 408, 400, 008, 012 no letters on any of these. Do I need to upgrade one of the boards to make system work?