Search results for query: *

I replaced the first combo card for the second time and problem went away. evidently the first replacement card was bad. A bad combo definitly will mess with a fax machine. Thank you for your inputs

I have two combo cards in the ksu and they are 2 way pri's. I have card 1 set to primary clocking and card 2 set to secondary clocking.

I have 2 pri's working in 6.1. I replace the combo card trying to fix a networking problem between this MICS and a second MICS. Now my faxes will not work. Will a combo card cause this?

IN the MICS it is the second slot-no problems with card in first slot. In the CICS it is the only card in the system. One other thing on both of the systems the users have dial up internet access on same lines shared by system, but no atas. could this cause problem.

I have recently put in a new CICS and A new MICS both have the latest release of 6.1 soft ware. In both systems about once a week the cards will stop working. If you go in maintenance it will show the card,but with 0 lines. You can not disable and renable to fix the problem you have to do a...

The System was 3.0, I replaced the 3.0 cartridge with a 6.1 cartridge and the sw card insert. I then performed a startup and set the system up as square. The KIM will not even flash when connected to the t7316e series phone. It acts like it is not getting power?

Upgrade my old 3.0 sw on mics to 6.1 . Eveything works except the KIM's on the t7316e telephones any ideas? Thank you