Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. trader56

    Paging question

    Can you leave your test set connected in the monitor mode in parallel with the amp and get the paging to work? If this works simply place a 600ohm resistor across the Tip and Ring and this should resolve the issue. Not sure why it worked for a month.
  2. trader56

    IP Office Valcom paging problem

    You have to place a 600ohm resistor in parallel across the Tip and Ring. This shows a load to the card and it will start working. You may have to reboot the system to reset the port, but this should take care of your issue.
  3. trader56

    IP Office with Windstream SIP Trunks

    Guys, I appreciate the help. We are actually the customer in this case and are working with our in house system to better understand so we are not doing this to a customer.
  4. trader56

    IP Office with Windstream SIP Trunks

    The SIP is connected to LAN 2. You are saying to set up a route for the internet off of LAN1?
  5. trader56

    IP Office with Windstream SIP Trunks

    We have installed IP office with Windstream SIP for the first time. When we use the Static IP they gave us we get one way conversation. We had to set up an IP route in the IPO as IP 0.0.0.0, SN 0.0.0.0, GW as the Windstream gate IP. This restricts our IP routes completely. We are running...

Part and Inventory Search

Back
Top