Search results for query: *

Customer has a virtual ext and mailbox 250 . Is there a way to have key light up whe. There's a message?

Hey, so I have DID when you call it the auto attendant answers 7893 the zero option works and rings main office hunt group 6200 and members. After about 5 rings a random mailbox on the system answers and I can't track it down It only happens when you call the DID not when you call hunt group...

Is there any way to get cossesions for old 2000 vm. Have a custmer that needs auto attendant changed. I thought there was another way to do it through hyperterminal possibly ?

Hi, trying on a embedded for a 3300 to be able to do extension from Auto attendant but cannot. You can press dial options programmed but not 4 digit extension. What did I miss

Having an issue replacing a bad um8000 blade. .blade And services will start and can connect but pbx just rings ucd group In F888 043 I'm showing 0 licence poets no matter what we do . Changed blade reset switch build ports from scratch but cannot get 043 to assign. Any ideas ?

That would be great please antwis79@gmail.com Thank you

Client stated on old 2400 they could press a key to see what caller ID their boss was on the phone with and then they could determine whether or not to interrupt....does anyone know how this might work on a 9300 ? They upgraded from a 2400 to a 9500

My customer wants to be able to put prime line on hold Automatically by pressing second line key when another call comes in. Is there a way to do this on the SV9300? Without using hold button

Unplugged everthing from controller and reset Alarm kighte flash and power lights flashed red also Cant ping IP address on lan 1 or 2 New to mitel and recently certified on 9.0

Found user took a data network cable and voice cable plugged both into a 8 port switch at their desk causing a broadcast storm

First and only PRI Pim 0 Here's the card I always thought this switch selection was correct when clocking off Carrier

Hi this is what we get after reset, phones never lose power. Isolated Lan1 and only 1 phone to see if I had some sort of broadcast storm DHCP discovery. We are getting IP addresses from ,3300

System lost power and came onsite and reboot phone will come up and after an uncertain amount of time they will lose connection to DHCP server. Reset the MXe they will come back New to the 3300 so is there a way to run a log of errors to determine if it's the controller or the switches /end...

Followed the usual cheat sheet to get new circuit running on 24PRT-B I have static on outbound calls and I see errors when users speak. Call eventually drops Called party does not hear static Possible bad PRI card Before calling carrier trying to see if I missed anything. Changed T1 cables...

So here was the problem. The cable modem was attached to cable amplifier splitter.... When I applied a ground to it the problem was gone When the ground was removed it came back. We tested this for about 3 hours The amplifier needed to be replaced by Cablevision

Checked all.these commands Rekeyed entire database from scratch New chassis New CPU New cards Same problem Dialtone at cable modem works fine but when you cycle through the line appreance trunks sometimes you can't grab dialtone and get busy signal even if trunk is idle. We put a buttset in...

On A SV81000 you can get dialtone but sometes the trunks will come up with fast busy on direct access Upgraded to Sv9100 see problem Changed cablemodem and handoff 49volts DC at idle Reversing polarity Changed trunk card and chassis When we put in sv8300 for test problem went away Only on...