Search results for query: *

Ok so techs out there say this will work now i am trying to find out for sure if I need a ATM/OC3 type converter or something else.

Thanks for the answer, do you or anyone out there know at what light wavelength the interfaces operate at?

I have an opt61c with remote site aprox. 5 miles away, using single-mode fiber and single-mode fiber remote multi-ipe interface on each end. One of my interfaces is currently down, trying to find another single-mode interface but they are hard to come buy. So I was wondering about using a...

I am trying to make a cable to connect to the maintenance db9 plug on a fiber remote multi ipe interface, does anyone know what the pin out for the ends are? Thanks for any help.

on an option 11 with built in callpilot can you get to the callpilot programming through the same connection you use to program the option 11 or do you have to use an external terminal.

That was funny and thanks Ghtrout for the PDF file it works good

Ghtrout said there was no LD 143 in the SL1 but I can go to LD 143 so this must not be considered a SL1 then. And back to my original question, one post said that LD 143 was located in the input/output guide or maint book, I may have old books mine go up to LD 137 and is that true that LD 143...

This is what it said: version 2311 release 25 issue 08

Ok I finally got back to this, so maybe it is not an sl1 I thought it was, I can go to LD 143. Can the sl1 be upgraded to the cs1000 I know it is an option 61c, how can I tell for sure?

In what manual is ld 143 located in? And my understanding is that ld 143 is used to reinstall the backup database, is this correct?

I am trying to find out how to connect an option 61c M1 ethernet network to the local company network through a cisco 3560G switch. I am trying to find out how to set up the cisco to seperate the phone system port from other traffic and get the phone system connected to the network to access...

How do you isolate a port on a cisco 3560G switch from other traffic and pinging so I can connect an option61 nortel pbx to the network. The pbx can't get the traffic or pinging from other devices.

Does anyone know what settings to change on a cisco 3560G switch to isolate a port from traffic and pinging to connect the option61 with the MAU's to the network