Search results for query: *

Hi, Anyone here already experience this kind of problem, Im setting up MAPD and the CVLAN Port state went to not connected. CV/LAN Port Status/Control DEFINITY Number of CV/LAN Messages Messages Message Node Port Client...

Hi Mitch672, yes i've already done that. I've put an analog phone with a caller id box and there is a number appearing but when i put it back in the pbx still same responce. Ive already change the receiving analog caller id to Bellcore but i receive from my 4610 ip phone is still the name of...

Hi Mitch672, Thanks for the reply but i already set this parameter to bellcore still doesn't work for me. Can you provide me a configuration guide regarding caller ID on MM711. Thanks,

Hi, Anyone here already configure Caller ID on S8300/G700 using MM711? i already verify to the telco provider if the caller ID feature is enable and as per telco it is already enabled. And properly configure the trunk and the system features. Any configuration guide regarding caller ID feature...

Hi, Anyone here already experience this im using a CM5? Pins may be between 7 and 32 characters, and may contain --upper and lower case letters --the number 0-9 and --the special character period(.) --the special character bang(!) --the special character percent(%)...

Hi, Anyone here already configure 802.1x together with Avaya IP Phones and cisco switch? Thanks

Sample Vector EWT without VRU 01 queue-to skill 80 pri h 02 goto step 12 if expected-wait for skill 710 pri h < 120 03 goto step 14 if expected-wait for skill 710 pri h < 240 04 goto step 16 if expected-wait for skill 710 pri h <...

Hi, We have been experiencing frequent downtimes for the LAN connection of the MEDPRO. Since the activation of the IP Phones last week, we already have encountered 4 random downtimes. Any has an idea regarding the problem? Thanks,

Question 1. Is there a possibility if ever my S8300 built-in voicemail box exceeded its limit of recording for 1 hour does it overwrite the existing messages?What does it do if ever it reaches its capacity of 1 hour?

Hi, Anyone here already experience when to make a call using the VoIP, the line become silent but when you press any number the audio re-establish again. Any Troubleshooting Guide for Avaya VoIP? Thanks

Still not working even i already remove the battery.

Hi, Does any one already experience that can't ping the ip address at the service port? We have implement a new S8300C/G350 when we power up the server we can't ping the S8300C server using the service port. Here are the log we get at G350 G350-???(super)# show faults CURRENTLY ACTIVE...

hi, i have a problem in our PABX when i dial the telephone number i cant make an outgoing and i hear the annoucement "SORRY ALL CIRCUITS ARE BUSY NOW PLEASE TRY YOUR CALL LATER". is the problem related to PABX or Telco? Need your help plss..

Anyone here already experience not registering the S8300 to G700 after a firmware upgrade of P330, VOIP, MGP and ANALOG Card? I already reconfigure the all the IP address of G700 and nvram init command. Please I need you help.. Thanks!

Hi mrjedi, how are you? do you have any materials or reviewer for Avaya Specialist Exam (Design) coz im planning to take the exam. Thanks

Hi mrjedi, How are you? I just want to ask if do you have a step by step guide for Tenant Partitioning? Or Documentation for Tenant Partitioning? Thanks!

Thanks mrjedi! ok i try these to our client. from where are you mrjedi?

Hi mrjedi, Thanks for the reply! But our seniors engineer told that it is not possible to upgrade from CM 2.2.2 to CM 3.1.2 using the web maintenance "manage software"? And the only way to upgrade the CM to 3.1.2 is by re-mastering the S8300 server.

Hi, Anyone here try already the upgrade from CM 2.2.2 to CM 3.1.2? What step or procedures do you use? any manual to use please post? Thanks