Search results for query: *

I am waiting for the customer with the password. How do i define the MWK?

I inherited this system, i am at the customer site now. The phone is M3902. i left a message in the mailbox the red light is lit, i go off hook and the message key does not work.

I need to go to the site tomorrow to find the TNB

Thanks! The voicemail works on all other phones

option 11 hard message key not working, tried another working phone still not working. Any help?

T-1

I have 2 MVP810 using a point to point T-1 Norstars are both using centrex lines and E&M cards. Intercom calls across the T-1 are fine. When an outside call gets transferred to the remote site the volume is ok but the backround noise and static make it difficult to hear. Does anyone out there...

I AM GOING TO RECOMMEND POINT TO POINT T1 WHEN THEY DECIDE TO USE VOIP

I GUESS MY QUESTION IS IF I INSTALL AN ip OFFICE IN MASSACHUSETTS AND THEY HAVE AN NEC IN WASHINGTON IS THERE GOING TO BE ISSUES? VOICEMAIL WILL RESIDE AT EACH LOCATION.

Is the IP Office 500 compatible with NEC systems? I may quote an IP Office but their other office has an NEC Voip system. Any help would be greatly appreciated.

Where can I find the software to program the AA in my elitemail VMP? Is this the co sessions software?

Thanks! Like Multitech gateway

no routes or destination codes needed?

I will have 8 E&M ports at each site MICS 4.1 how do I transfer an incoming call from site A to site B?

Thanks!

I have 2 audiocodes mp118 FXO gateways. I have 8 E&M trunks at each end. My route is dialing to the gateway channel(I can hear it with a butt set) but the gateway does not dial to the other gateway. Do E&M work over FXO or do I need FXS?

I have 2 audiocodes mp118 FXO gateways. I can hear the digits from the E&M port going into the gateway but the gateway never dials the other gateway. Do I need FXS gateways instaed of FXO or can the FXO be configured for this norsatr E&M ports?

I have one MICS in town A and one in town B. Should I upgrade both MICS? We have a PT to PT t-1 in place and is being used for data, can I add bandwidth to this and use it for transferring calls between sites? Can I have one voicemail unit? What hardware and software do I need to complete this...

All copper lines are answered by AA, all DID's work. However when a second cll comes in and the main copper line is busy the call rolls over to the t-1. these calls are ring no answer. I need the AA to answer the hunting calls also.

Not sure how to do that but maybe the IT person does. Thanks!