Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. tylerdesjardins

    BCM400 R4.....Distorted/Garbled Voicemail Messages

    No solution. I told the customer you have to live with it or upgrade to Avaya IP Office
  2. tylerdesjardins

    Configuring a device requiring a Port assignment to a VLAN

    to port forward on Cisco IOS... ip nat inside source static <udp/tcp> <inside local address> <local UDP/TCP port> <WAN interface name or WAN IP> <global TCP/UDP port> example router#conf t router(config)# ip nat inside source static tcp 192.168.2.100 8080 209.91.128.10 8080 this will forward...
  3. tylerdesjardins

    Cisco Crypto map unassigned after reload

    Use the bug toolkit to see if theres a patch/fix
  4. tylerdesjardins

    Cisco Crypto map unassigned after reload

    probably a bug in the IOS then. http://www.cisco.com/en/US/docs/ios/12_3/release/notes/123mcav3.html Known Bug: CSCeb20989 Symptoms: After a Cisco router has reloaded, part of the configuration that is defined in the startup configuration may not show up in crypto maps.
  5. tylerdesjardins

    Cisco Crypto map unassigned after reload

    if it's after a reload... the only thing I can think of off-hand is the #copy run start or #wr mem isn't completing. After entering either command, make sure it says '[OK]' like below Router#wr mem Building configuration... [OK] Router#
  6. tylerdesjardins

    Configuring a device requiring a Port assignment to a VLAN

    The ports it is asking for you to assign (8011, 8012, etc.) has nothing to do with the switch...those ports are for your video surveillance software and webGUI management. I don't know what kind of IP cameras you have but most have three ports (Control, Video, and Audio) so if you choose, lets...
  7. tylerdesjardins

    BCM400 R4.....Distorted/Garbled Voicemail Messages

    In the Alarm log, I did get /var/log is at or near capacity, but after a reboot it went away. My SNMP monitoring software shows Memory Usage at 98% but BCM monitor stays at 54%...I'm of course going to trust BCM monitor (designed by Nortel, designed for BCM, etc.) SNMP software also...
  8. tylerdesjardins

    BCM400 R4.....Distorted/Garbled Voicemail Messages

    I just got word that the garbled/distorted audio is being heard by customers listening to the greeting/auto attendant. Could this be a Voicemail issue? since AA works through Voicemail Ports
  9. tylerdesjardins

    BCM400 R4.....Distorted/Garbled Voicemail Messages

    Nope. The same message can be checked, lets say 10 times, and may only be garbled once.
  10. tylerdesjardins

    BCM400 R4.....Distorted/Garbled Voicemail Messages

    Nope. The same message can be checked, lets say 10 times, and may only be garbled once.
  11. tylerdesjardins

    BCM400 R4.....Distorted/Garbled Voicemail Messages

    Hello All. I have a customer with a BCM400 R4 (4.0.2.03) at their main site. They have had 5-6 employees complain of Garbled and Distorted audio when listening to their voicemail through their digital set (T7316e). It is intermittent (not every time they check there VMail). I am sure it has...

Part and Inventory Search

Back
Top