Search results for query: *

...BRIP NO DGTP DTI ISDN NO DSEL 3VCE PTYP DTT AUTO NO DNIS NO ICOG IAO SRCH RRB TRMB YES STEP ACOD 719 TARG CLEN 1 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO ANTK 3016 SIGO STD STYP SDAT TIMR ICF 32640 OGF 32640 EOD 32640 DSI 499200 NRD 32640 DDL 511...

I have 3 new PRIs which are going into a new route. I have the route and one of the PRIs configured but calls are getting intercepted to the attendant. The route is aquired in Symposium but I'm not sure where else it needs to be set up to give voice treatment. Meridian 1 Rls 4.5 CallPilot 703t...

How can you tell if the Symposium server was install as standalone or coresident for Web Client on SCCS 5.0?

I was in the process of doing your list of options and figured, what the hell, and changed the controller card out while I had the shelf down. The card slot is working now. Never thought a controller card would be the culprit for a single card slot. Thanks for your help.

If you want to remove the DN on key 08 then type nul for key 08. item key 8 nul

Tried reseating the controller card and still cannot enable any card that is in slot 11.

There aren't any bent pins on the backplane and cards work in other slots.

XMI001 & XMI002

Yes. I can IDC the card.

Yes. I have an analog phone programmed on that card. I stat the card and it shows idle. I disable and enable the card and get an NPR326 response.

I have card slot 56-1-11 that I can't enable the card that is in that slot. If I plug/unplug the card in the I get the XMI messages, but cannot enable the card. Thoughts?

Yes. You have to install a patch for Rls 5 which install a newer version of CallPilot Manager. Once you install that, run the wizard and check the time zone setting. It will be set to a time zone an hour ahead of yours.

Bad news is no simulator, just lots of OJT.

Fast busy

TYPE NET_DATA CUST 00 OPT RTD AC1 INTL NPA SPN NXX LOC AC2 FNP YES ISDN YES VPNI 0 PNI 0 PINX_DN MBG 0 BSGC 65535 PFX1 PFX2 HLOC LSC RCNT 5 PSTN NO TNDM 15 PCMC 15 SATD 1 OCLI NO DITI NO TRNX NO EXTT NO FTOP FRES VNR NO NIT 8 NAS_ATCL NO NAS_ACTV NO FOPT 14 CNTC...

I've programmed and tested both ways with AC1 and ACOD 7150 and the call still fails.

SPN 1800 FLEN 0 INPL NO CLTP NONE RLI 1 SDRR NONE ITEI NONE FEAT rlb RLI 1 RLI 1 ENTR 0 LTER NO ROUT 50 TOD 0 ON 1 ON 2 ON 3 ON 4 ON 5 ON 6 ON 7 ON VNS NO CNV NO EXP NO FRL 1 DMI 0 FCI 0 FSNI 0 SBOC NRR IDBB DBA IOHQ NO OHQ NO CBQ YES ENTR 1 LTER NO ROUT 89 TOD 0 ON...

Is 9 AC1 and 8 AC2 or are they ACODs to routes? 9 AC1 & 8 AC2 1800 programmed as SPN under AC1 or AC2? AC1

TYPE acd CUST 0 ACDN 6093 TYPE ACD CUST 0 ACDN 6093 MWC NO DSAC NO MAXP 1 SDNB NO BSCW NO ISAP NO AACQ NO RGAI NO ACAA NO FRRT SRRT NRRT FROA NO CALP POS ICDD NO NCFW 715018008639279 FNCF NO FORC NO RTQT 0 SPCP NO OBTN NO RAO NO CWTH 1 NCWL NO BYTH 0 OVTH 2047 TOFT NONE HPQ NO OCN NO OVDN...

DES HELPDK TN 156 0 00 03 PHANTOM TYPE 500 CDEN 4D CUST 0 WRLS NO DN 6901 0 MARP AST NO IAPG 0 HUNT TGAR 7 LDN NO NCOS 2 SGRP 0 RNPG 0 XLST 0 SCI 0 CLS UNR DTN FBD XFD WTA THFD FNA HTD ONS LPR XRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD CFTD SFD MRD C6D CNID CLBD...