Search results for query: *

In a CP mailbox class, there is an RPL section at the bottom with these entries: External Call Sender Outdialing Revert DN Delivery to Telephone and Fax Remote Notification Fax Printing Desktop Can someone please provide examples when each one will be used?

Environment: CS1000E R7.5 Recently, one of the admin accounts created in SysMgr can no longer SSH into one of the signaling servers with the "Access Denied" error message. How do I fix it? This same account can log into other SS and CS fine with no problem. Also, now that we use centralized...

Is there a way to verify from the CS1000E R7.5 whether call forwarding has been activated on a set without walking over to the set? TIA

No need to reply. I already got my answer by reading mikepbxb's web site.

Occasionally, our vendor says that they need to INI the system to activate certain feature or change some configuration. It didn't take down anything since we have redundant system. Well, I am interested in learning how they do it. So what do they mean by INI-ing the system and what CLI would...

Updated instructions: Steps: 1. FTP to the CS 2. Change directory to /cf2/keycode 3. Rename keycode.kcd to something else for rollback if needed. 4. Transfer the new keycode.kcd file over. RMD will now point to the new /cf2/keycode/keycode.kcd 5. SSH into CS 6. LD 143 7. KDIF REC RMD 8. KNEW RMD

scotthdiv, You are right. I was looking for a place to put the file up under /u and /p. Most locations won't allow me. I guess /cf2 is the exception. This would cut down the hassle of using PDT.

For the step 3 above, the correct file name is keycode.kcd.

I am on CS1000E R7.5 Steps: 1. FTP to the CS 2. Change directory to /u/pub 3. Transfer the .kcd file over 4. SSH into the CS 5. Switch into PDT mode 6. Rename /cf2/keycode/keycode.kcd to something else for rollback if needed. 7. Copy file from /u/pub to /cf2/keycode 8. Exit PDT mode 9. Get back...

You can use an FTP program such as WinSCP to transfer the file.

For other users, what KCFLHRC said was correct that the file needs to be on a compact flash or enter it line by line through command line. There are a couple of methods to get the file onto the compact flash: 1. obvious method: direct copy from the computer 2. FTP file over to the CS, then copy...

KCFLHRC, thank for the quick answer.

Sigh, I guess I don't need to ask whether I can FTP the file to the server somehow.

I can SSH into the CS1000E R7.5, but how do I transfer the file over the network and install the license (.kcd) file remotely? Thank!

Yes, playing around with RCO fixed the problem.

KCFLHRC, Can you provide the user guide's NN43xxx-xxx number? TIA

CS100E R7.5 I setup an on-call paging system using the following configuration: CP application Press 1 to page group 1 (transfer call to x331001) Press 2 to page group 2 (transfer call to x331002) Press 3 to page group 3(transfer call to x331003) on the x331001 phone, a group 1 member would...

We use CS1000E R7.5. When I am away, I would like to lock my 1140E set preventing people from making calls from it. Do you have any suggestion on what I need to do? I tried assigning a SCPW, then enable the protection mode. I don't see how to actually activate it to lock/unlock the phone.

Can someone explain to me what this ACD is for? And, how can I find out what's been using it? TYPE ACD CUST 0 ACDN 3998 MWC NO DSAC NO MAXP 1 SDNB NO BSCW NO ISAP NO AACQ NO RGAI NO ACAA NO FRRT SRRT NRRT FROA NO CALP POS ICDD NO NCFW FNCF NO FORC NO RTQT 0 SPCP...

I use a maintenance set to seize a channel on a specific PRI to make test call.