Search results for query: *

LG LDK600 software ver 3.8ah

Hi guys I need to program a single LDK600 for 4 different companies each with two sets of diffrent carriers for outgoing calls, this means that we'll have 2 different CO groups for each company and 4 different extensions tenancy groups. The probleme is when you try to program the LCR there is...

open the system cabinet and tell me what boards you can see. I need on MFIM100 there is 4 way dip switch. What are the positions? Look for POE8 board. Is there a free port? Take a fly lead and plug it on the poe8 free port and on the lan port on your phone. Leave for a while and see if it will...

I now have a clearer picture. Incoming call to LCOB trunk port only first 10 digits displayed. Incoming call to VOIM trunk ports all digits displayed. What do you need/program on LCOB to display all digits?

Thanx martinhodge. I use 4 diffrent SIP providers. The other 3 i have no problems all my lines register and work perfectly fine. It is this other provider who specifically told me to use Asterisk 13 or better, one that is rfc3966 compliant after querying why the lines were not registering. I...

I am on PSTN, SIP and GSM PSTN lines- These are fine because they are less than 10 digits. But GSM and SIP lines are 12-14 digits long and international calls are up to 16 digits.Format from service provider(SP) is +xxx(country code) yyyy(area or SP code) number(6 digits or more) thanx

The system is MIFM600. Incoming calls show up to 10 digits only. For incoming id with more than 10 digits i can not see the last digits and so can not return missed calls. Is there a way of showing all digits or may be strippig some leading digits to accomodate the remaining digits. thanx in advance

The lines wont register

Hie everyone I am failing to get sip lines from a provider working on ipecs lik600 ver 6.1bf. The provider has told me to use Asterisk 13 or better, one that is rfc3966 compliant. Has anyone come across this problem before?

anyone knows if eMG-80 is supported by eZ-Attendant? I installed 3.7Ag and there is no selection for eMG-80/800 on setup. Selecting any other ipecs loads all exten info but none of the buttons work(no click to dial etc)

I am looking for MFIM100 recovery files. can anyone help

hie all can someone please help with networking ipecslik600 with ipldk using h323. I have successfully networked ipldk to ipldk and have tried to do the same with ipecs lik600 with no success. If someone can point me to a step by step manual will be very grateful. rgds

Hi I have setup sip trunks on ipecs300 Ver E.5 and they are registered. they are set to ring as normal incoming trunks - no did tables. I can make outgoing calls with no problem. I can also receive incoming calls but if the lines remain idle for at least a minute they stop receiving calls until...

thanx doktor i will look at it.

hie guys Has anyone ever configured LDK300/600 to an External Voicemail and Messaging System (Microsoft Exchange 2010 Unified Messaging System). The setup required is that busy/unanswered calls should forward calls to this system for processing. I am thinking of an FXO gateway in between but I...

Thanks guys. In future I will order the 88xx series.

Hie guys Can someone help me with log in details for LIP 8xxx phones both on web browser and Telnet(hyperterminal). Can this phone be used as SIP device on a none IPECS system. thanx in advance

Many thanks guys. I got all the licences and installed them. Working perfectly!

Hie everyone Can someone give me the steps needed to check for licences installed on IPECS - MG and SBG.

Many thanx all. I have tried randall1uk (TechnicalUser),s suggestion and each company is receives the same output. Only risk is if port on one machine goes faulty!!!!!!