IPECS Licences

[Digitalcoms]

Hie everyone
Can someone give me the steps needed to check for licences installed on IPECS - MG and SBG.

 

[doktor]

The page I found this on was a pdf at

http://www.proftelecom.by/files/Lock-Key.pdf

///doktor
____________________________________

http://www.kandu.dk/spg153996.aspx

 

[doktor]

I added some good extra information...

1. Connect to LDK-24 (telnet)
2. Apply 'admin' and 'admin' for login name and password.
3. Type "c e" and enter OR "co e" if the version is 3.0/3.7
4. Type "call" and enter
5. Type "mnt q d" and enter for displaying the serial number.
6. Write the lock key data "mnt q w X (lock_key_number), where X is the type of lock key.

Lock key type 2 = TAPI
Lock key type 5 = Networking
Lock key type 6 = PC Phone (ezPhone)
Lock key type 8 = TAPI 1st Party

///doktor
____________________________________

http://www.kandu.dk/spg153996.aspx

 

[doktor]

OK.
I guess that you just want to check the number of licenses?


1. Make a [TRANS/PGM]+78 to see the licenses in your ipLDK or iPECS. Just post what the display writes.


///doktor
____________________________________

http://www.kandu.dk/spg153996.aspx

 

[Digitalcoms]

Many thanks guys. I got all the licences and installed them. Working perfectly!