IP Office 500v2 6.1. Installed in a residential environment. Three analog lines.
Using single-line extn for a gate controller. I started with the extn programed with shortcode ?D to dial group number. Was able to dial fine but could not transmit DTMF long enough for gate controller to recognize...
IP Office 500v2 6.1. Installed in a residential environment. Three analog lines.
Using single-line extn for a gate controller. I started with the extn programed with shortcode ?D to dial group number. Was able to dial fine but could not transmit DTMF long enough for gate controller to...
From what I gather from the conversation with this guy was something to do with SMDR output. He got it from somewhere/somebody that the 4.2 wasn't compatible with the product hes seeking.
So, a guy calls me up and wants me to upgrade his IP406v2 to the highest he can go without having to buy a license.
He says he is running 4.2 now. I hesitate to get involved with this guy because he is an in-house IT guy for a regional company down here, and he does all his own service so he...
I just had an SX200 ICP hard drive crash. Then found out my backup was no good. Starting over with all programming and have an issue with the AT&T PRI. Everything seems programmed properly and can call out fine, except no ring back. Call does ring called party but I hear nothing.
Also, can not...
You are correct Westi. The bogen TPU series does indeed have a ringing input. We kinda like the Classic series amps because the TPU's price out a bit high. But thanks a million for your post, I always respect your ideas.
Just moved a 500v2 9.1.6. New location needs ringing over page in shop. Old location had only two 5w self-amplified horns on s/l extn programed as page port. New location much larger and now installing Bogen C35 with 2 SPT15A. Also, new location requires ringing over speakers. Any simple...
Thanks guys, personally I'm leaning towards the local DHCP issue. Trying to get in front of the inhouse network and direct to Comcast modem. I think something in their router/modem might be blocking.
So its 4:55pm and I find myself in need of some guidance.
I have an IP Office 500v2 9.1 and have been trying to set up the 9630g phone in vpn mode. Phone loads great as a simple ip phone but when enabling VPN Mode, and entering all the required info, I keep getting: VPN tunnel failure
And...
We have a real-estate office who does similar with "agent on duty"
I created a phantom user and sent the AA single digit to that user. Office manager will login as that user, from her phone, and change the fwd destination each time the agent on duty changes.
Yes I have. But I don't get that far. In Admin- Configuration- Users, all the users in the system should be recognized, or it does on other portals I have working already.
Am installing OneX Portal. Using 9.1.7 IPOffice and 9.1.7 OneX Portal.
All goes well until I click on "Get All" in the Configuration- Users.
No users of the IPO are displayed. Only the "grayed out" default users of the OneX.
I do get a Failed Status under Health, Component status (DSML...
Hey, thanks for the heads up on the fax issue. In the past AT&T has been the only carrier that fax service would work on their traditional PRI. But makes since that SIP trunks would guarantee fax.
And thanks Joe for the heads up regarding EarthLink, never did like those guys either. Of course...
Hey guys, thanks for all the input.
And Westi I think you just gave me the answer to anoyhe issue we just ran across last week. The same customer has one site with EarthLink and they use an Adtran router to connect to the PRI. Customer has lots of issues with outbound calls and bad connections...
I gotta say, being from Southeast Georgia here in the good ole USofA, reading these posts from you guys all over the world is cool as hell. How small our world has gotten over the last 15 years or so. Great being in the presence guys like ya'll. I've been an old tip and ringer since '79 and the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.