Search results for query: *

I was upgrading Mitel AX Controller from MiVB8.XX to MiVB9.XX using MiVB migration Tool everything was going on fine until this error came up as shown below, Please I need urgent information on what next to do ************************************************************** Configuration...

The display issue started last month, but the phone are all workinh

Mitel AX controller on ICP 9.0.0.41 software level suddenly all four IP phone connected stop displaying but are all working when you call all the respective extensions. Please what can be the cause?

Now I have upgraded to MiVB8.0_SP3_PR2 but I am having Licensing and also restoring database using Software installer please see putty file 1 1 0 1 1 1 1 1 1 sysro_common_hw_loads.tar.gz /ramdisk -> /inactive/sysro631 1 0 0 0 0 0 0 0 0...

Currently the Hard Drive is empty without Software and I want to Load MiVB8.0_SP3

I am having difficulty doing manual install on Mitel CXi II Controller, I am getting the below errors MITEL SYSTEM ROM R3.1/17 Feb 5 2018 CCA Number : 56009216 RC.2 System Model : 00610001 F100 CPU Model : 8360 R80480021 Reset...

I have a E1 trunk line Pilot 2800100 with a range (2800100-599) and was setup to route through auto attendant before reaching the operators. However my client want DID for this two extensions. 2800110 to land on extension 6804 and 2800111 to land on 6140. Please how do I achieve this send task...

All calls still goes to the Operators, even the two numbers 2800110 and 2800111( This is with MITEL 3300 MXe III Controller)

I have a E1 trunk line Pilot 2800100 with a range (2800100-599) and was setup to route through auto attendant before reaching the operators. However my client want DID for this two extensions. 2800110 to land on extension 6804 and 2800111 to land on 6140. Please how do I achieve this send task...

I have a E1 trunk line Pilot 280010 with a range (2800100-599) and was setup to route through auto attendant before reaching the operators. However my client want DID for this two extensions. 2800110 to land on extension 6804 and 2800111 to land on 6140. Please how do I achieve this send task...

I have looked at the NVR software version which is release 5.7.8.1005, the compactable Command client software for the release is version 1.8.1.44087. However, this version of command client is no longer on the March Network partner portal for download.

I need march Networks command Client software version 1.8.1.4408 very urgent7 Anyone can help me is old version and not on the download link.

How do I assign an IP address on E2T card using Putty, or any other procedure? Please very urgent.

I carried-out a new installation and upgraded the software to Mi9VB8.0 SP3 on MXe III, the connection is through the Client Sverver though the DSCP server on the Controller is enabled. The problem is all 5312 IP Phones are not booting up. On screen displays (Waiting for DHCP, NEXT vlan 4 PRI...

I have two MXe III on Cluster, and the controllers are on different VLAN699 of IP 10.182.102.130-157,Subnet- 255.255.255.224 Gateway 10.182.102.129 and the IP phones on another VLAN601 of IP Range 172.16.0.0- 254, Gateway 172.16.1.1.I am pointing to a PABX Core Switch with IP 10.182.102.158, All...

I want to know if I can achieve this without a full network environment( Managed Router). I only have non managed switch and the two MXe III. Can the routing be setup within the MXeIII Controllers

I want to know if I can achieve this with a full network environment. I only have non managed switch and the two MXe III.

I have two MXe III on Cluster, and the controllers are on different VLAN of IP 10.182.102.130-157,Subnet- 255.255.255.224 Gateway .129 and the IP phones on another VLAN of IP 172.16.0.0- 254, Gateway .1. I want to configure the IP phones before taking the to the site but the phones are not...

thanks

I am having Subnet Mask as 255.255.255.224 how do I convert this