Search results for query: *

Thank you Kevin and Sizbut .. Great hints. I 've been reading some integration doc about DuVoice, it seems to be exactly what I was looking for. Thank you so much.

Voicemails is a must for the guests .. I wish I could ..lol

Thank you Westi for the great advise.. Yeah it is mainly a Family shelter (most of them don't have cell phones) .. The client currently has a Genesys server for call accounting/SMDR but I don't think it is CRM capable. I'll tell them about this CRM solution(Maybe ZOHO from what I googled) but...

Thank you Westi.. It tells me that the IP Office is NOT Motel friendly. My client has 250+ users at least of 150 rooms.. Guests normally leave their rooms after 2-3 nights .. The voicemail is enabled for them and my client needed a way to delete all "guests" messages every 24 hours or so. Also...

Thank you for your input ..It would be a very good to have as you may have occasional users that you need to regularly delete their voicemails

Hello, I have a R11.1.2.3 IPO with C110 Voicemail module. My client needs to delete voicemails for certain group of users after 2-3 days or so. The vmpro housekeeping option is a system wide setup.. Is there a workaround to automatically delete voicemails for certain users?

It is really funny Grandstream won't allow roaming between Dect Base units.. I am going to add DP760 overlapped repeaters to extend the coverage of each DP750 Base

Awesome, thank you, just like IPOHEAD said, my issue was that Grandsterm dial plan was not accepting "*" , to prove it I used Westi method and it worked just fine . Much appreciated.

Hello.. How is it possible to dial shortcodes from Non-Avaya SIP phones.. I need to park calls from a Grandstream DP720 cordless phone but unable to find a way to perform hook flash. Any ideas?

It looks like each DP750 can only host 5 Handsets.. Does that mean cordless users are unable to roam between Dect base units as I need to setup 20 sets over 4 DectBUs? Meaning Handsets registered with BaseUnit1 are unable to get signal if they are in the Base Unit2 range only?

Noted! Thank you. For the second part I was referring to the max number of SIP users can be added on a single DP750..

Thank you Westi, So no need to create a SIP Dect Line in the IP Office, correct? Also, I have about 20 DP720 IP sets and 4 DP750 Dect Base Units.. Do I need to add these DP720 sets to every single DP750BU?

Hello, I have an IP Office 500 V2 R11.1.2.3 and need to add multiple IP Dect Base Units from Grandstream DP750.. Anyone knows how to setup DP750 in Manager?

Hello. Is it possible to automatically generate Authorization codes for dialing LD on daily basis or so (or by externally injecting them into IPO via API ...etc)? Or at least being able to import Authorization codes into IPO as CSV sheet? My client has about 200 guest rooms/users that would...

@iamashepra thank you for the information. I tried that too but realized that the Iphone always grabs a local ipendpoint license. It looks like the base station has to be licensed even with no users logged in..

@IamaSherpa, Very interesting. I will give a try one more time and see how it goes. My main goal was to grab IP Phone licenses from a remote SCN location as we have limited local license seats.. Mainly: My client has 5 IP office 500V2 in distributed locations interconnected via Avaya SCN.. •...

@sizbut thank you for the information. Yes i do agree. Btw, my client has an IPO500v2 but also need to register a couple of IP phones (connected at the same LAN1 subnet) to a remote server over MPLS via LAN2. I was trying to send the traffic from phone-->pass LAN1 -->pass LAN2-->pass the...

LOL. fair enough . Thank you

Not sure if NAT needs enabled on the LAN1 interface..

Hello everyone.. I am trying to setup my client's IP Office 500V2 as a router to forward packet coming to LAN1 to outside the system via LAN2.. The IP route is setup poroperly but still unable to perform routing.. Am I missing anything?