Search results for query: *

All the 8410s are on the same card. I took the working one and swapped it with the non working one and it showed ID all the way through ring cycle. Problem solved, right. Had to be something with the phone. Then I plugged the bad one into the other port and it now works. Doesn't seem to make...

Any ideas on why the caller ID on an internal call goes away after the first ring. Phone keeps ringing but caller ID drops. The phones are 8410Ds Only happens on a couple of them. Rest are fine. I don't see any dif. in features between the working ones and the ones that disappear after first...

When I try to add sta 0 it says ext. invalid. G3V4i

I'm trying to replace my 302A&B console with an 8434DX. I really don't need any of the console/attendant features. I set up a new ext. (XXXX) with the 8434D and I can point all outside calls to it by changing my trunk group. Problem is my dial 0. When I look at dial plan it shows 0 first digit...

Thanks for the input. looks like the best I will be able to do with this version is to go with the 8410D or 8434D which it looks like like I'll need an external power supply. I only have a handful of Dig. sets on this Definity. Condo environment with 300 analog and about 10 dig. Dig. are all...

I'm trying to upgrade some of the old Dig. phones to something a bit more modern. Can i use the 6400 series phones just by adding a TN2181 card? Switch is "G3siV4+m Software version G3V4i.07.0.007.1 Thanks....

I'm in the process of getting together a crash kit for our sys.. 85 G3. Carrier A has 631DA1 and 631DA2 Carrier B 631WA1 and 631WB1. Same on carrier D as on B. Carrier C has a 631WA1 and a 631BR. Is that 631 BR interchangeable with the 631WB1? Any other suggestions on what cards to get...

Thanks for all the input. Looks like we can save money on trunks and a bit of equipment versus a whole bunch of money for equipment we really don't need. I can also get spare power supply. That's what went out a few months back and we went down for over a day. That's what really got them...

I thing they are just getting a bit nervous about the age of the equipment. That and someone put a bug in the ear of the mgr. about going IP saving them a whole bunch of money. Considering we have all those analog sets that would need to be converted from dig back to analog looks like the cost...

The Cab. is a MCC. Assuming that means multi carrier.

We have a G3 V4 that is currently running around 375 analog sets and 20 dig sets in a condo environment. One console,no VM, no call acct. About 30 GS trunks all on copper. Pretty simple setup. Our contract with local DT provider is about up and mgmt. wants to either upgrade sys or look at...

Yes, It's the 18 inch blue end cable with the notch on the side. The speaker goes through the audio sequence when powered up. Is it possible I have to disable the speakerphone capability of the 7444D some how?

I'm trying to add an S202A speakerphone to a 7444. Speaker powers up via existing power supply but the only thing I can do with it is change level on volume. No sound from speaker, speakerphone light will not come on when button pressed, Are they compatible or do I need additional, different...