Search results for query: *

#format bootflash: MSFC(boot)(config)# boot bootldr bootflash:c6msfc2-boot-mz.121-26.E1 MSFC(boot)(config)# boot system flash sup-slot0:c6msfc2-jsv-mz.121-19.E1.bin MSFC(boot)# show boot read more: http://cisconetworkingcenter.blogspot.jp/2012/09/network-diagram-templates.html...

yum remove first... check yum repolist then yum install from remi

PV PV PV PV ----------------------- | VG | ---LV----------LV----- PV Physical Volume VG Volume Group LV Logical Volume #vgdisplay #vgs #vgscan

match your concept, i found it@first-hop-redundancy-protocol

this may help DHCP

ip local pool Remote_VPN xxx.xx.xx.xx xxx.xxx.xxx.xx ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 xxxx

use the same protocol and same model, compare the configuration... it should be worked

driver problem? or use the wrong serial port

don't forget to run hardening on your cisco internet router..[2thumbsup]

The analysis process follows these steps: 1 . Can the workstation communicate with any other device on the subnetwork? If no, then go to step 2. If yes, determine if only the server is unreachable. If only the server cannot be reached, this suggests a server problem. Confirm by doing step 2...

you just power the switch off. There is no way to shut the switch down at the command line.[bigsmile]

sample config on switch ! interface GigabitEthernet1/0/5 switchport access vlan 30 switchport mode access switchport voice vlan 20 ip arp inspection limit rate 50 srr-queue bandwidth share 10 10 60 20 srr-queue bandwidth shape 10 0 0 0 priority-queue out mls qos trust dscp...

have you ever used Netscount and Solarwind packetflow interface GigabitEthernet0/0 description *** connected to SGHQSL2-6509 G1/1 *** ip address 156.50.200.198 255.255.255.252 no ip redirects no ip proxy-arp ip pim sparse-mode no ip route-cache cef ip route-cache flow no ip mroute-cache...

some out put sample case on 6509 ___________________________________________________________________________ Port (Our Port): 3/4 Device-ID: sgdcSL5-4506.sgdc.chevrontexaco.net Device Addresses: IP Address: 123.55.193.4 Holdtime: 176 sec Capabilities: ROUTER SWITCH IGMP Version...

Hierarchical model can be apply to your network more info here: http://cisconetworkingcenter.blogspot.com/2012/03/cisco-hierarchical-model.html

Configuring COR for Incoming and Outgoing Calls One of the ways to restrict unauthorized incoming and outgoing calls is to use the Class or Restriction (COR) commands. The configuration shown in the following example defines two groups of users: user and superuser. Superuser is allowed to make...

try to read/join on Cisco communities: https://communities.cisco.com/community/technology/collaboration/business?view=discussions https://supportforums.cisco.com/community/netpro/network-infrastructure/switching...

don't forget to enable username and password including enable secret

Hot Standby Routing Protocol or HSRP, is a Cisco proprietary protocol that allows two or more routers to work together to represent a single IP address for a particular network. HSRP, as well as Virtual Route Redundancy Protocol (VRRP) are considered high-availability network services that allow...

Telephone System Contigency Flow or Procedure... I have to write it and sent to my boss[3eyes]