Search results for query: *

I have a hipath 4000 v1 which I suspect that the hd and mo no longer works despite them being active act-dssm 1 and 6 act-dssm 1 generates a dscr error h 2B and act-dssm 6 generates no media both disks are mounted on the same board the system works correctly but I have no access to comwin I...

thinks for your help the Protocol we use is ECMVA2 IN ALCATEL the Protocol is QSIG-gf after many attemps the PRA T2 CARD is ok the probleme is that i have permute pins in the subb 15 of the diun2 card of port 1 now the connection is established but rest the route off calls how to update...

DISPLAY-REFTA:; H500: AMO REFTA STARTED +-------------------------------------------------------------------------+ | R E F E R E N C E C L O C K C I R C U I T S | +--------------+---------+----------+---+------+------+------+-----+------+ | PEN...

Crc4 is set to N Hipath is slave and omnipcx is master The PRA T2 CARD in alcatel show LOS and RAI error the 30 Chanels indicate HS state Dis-bssu show activated but not ready

this is the config of diun2 what we done ADD-BCSU:DIU,1,1,25,"Q2196-X ",0,,,,,1,,,,,A; DISPLAY-COT:COTNO=120; H500: AMO COT STARTED COT: 120 INFO: COT FOR E1 DEVICE: INDEP SOURCE: DB PARAMETER: RECALL IF...

We have a hipath 4000 V1 with a DUIN2 Board we want trunking with alcatel omnipcx entreprise T2 interface Witch protocol must be used and help me Who config diun2 card step by step Thanks

Dears Hi, we have a hipath4000 v1 and we have a problem to acces to mo drive witch contain a backup system when we try to activate the drive we have this ACTIVATE-DSSM:UNIT=A1,CNO=6; H500: AMO DSSM STARTED F22: DEVICE <:A1H61:> IS NOT ACTIVATED BECAUSE OF DSCR ERROR H'2D a DDSM display ...

WE HAVE A HIPATH 4000 V1 Connected with analogic line with clip option to post office how must we configure it to dislpay the incomming call the PO STATION?

yes we have done this with cat tool last five czlls missed. but nothing appears in display just a question why we must do this with cat tool ? a change setting with sbcsu ( DIGNODIS=N ) can't resolve the probleme ?

we have hipath 4000 v1 which run normally until yesterday . we have changed the cordless data base (after a breakdown ) with CATtool ver 2.3 and the system run correctly unless the mailphone (missed call) didn't appear in the cordless mobile (SL1). the parametre DIGNODIS=N in the SBCSU amo is...

very thinks sbcsu I'll try this version tomorrow

hi i have hipath 4000 v.01 to administrate cordless station , I instal CATtool version 7.0.30 my problem is that this version seem incompatible with my hipath , many amo command don't work (not present in hard disk ) like amo slcb , zande ... can any one help me to find another version CATtool...

hi to generate data from my hipath 4000 to CAT tool we have this erreur: display-zande:typealldata; M13 VALUE not within admissible range the amo zande display the same erreur with comwin program can any one help me ?

thinks sbcsu can you explain me step by step how to first launch CAT tool

my probleme is that i want to administrate cordless base with CAT administration tool and to configure cat it reclam ECI ID system

can any one help me to find the ECI ID for my hipath 4000 with amo command thanks

very thinks for your aid

can any main help me to get the soft CAT v 2.3.2 to administrate my hipath 4k ? thank you

until this instant the system is OK CDR's outgoing and are correct I didn't change the PDC5 board ,all what i do is to invert the mini switch in front of the ADP board to synchrone mode (V24 interface ) and i return them to asynchrone mode in result CDR trames appears I'm trying to understand...

i'm in process to change a DPC5 BOARD before turn off the shelf we must deactivate the ADP please what is the AMO code to deactivate