Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. joeb5110

    9751 Mod 10 9005.6.94 <TRANSACTION ABORTED>

    When trying to save changes to a Rolmphone the system replies with <<ERROR: TRANSACTION ABORTED>> I haven't tried every other table but have been able to save extension changes, speed dials, and a few others. Would a FINIT solve this? I'm thinking the corruption is in memory and a reload from...
  2. joeb5110

    Legacy Avaya paging

    In older TDM Avaya pbx's, what are the properties of an auxiliary trunk card that it's used for paging instead of a trunk card? The "paging loudspeaker" screen has no typical trunk configuration. What causes a voice page to interrupt the music? Is that a feature of the trunk, or the interfaces...
  3. joeb5110

    Storage location for password

    We provide remote support, can't view the SAT, that's if there even is one. There are no spare cards. I requested a flash card and a TN794 from an old system no longer in use but it will never be shipped. This is the environment I work in. With all this in mind, we've started planning the...
  4. joeb5110

    Storage location for password

    I did watch the system boot up and it appears that all but the last steps pass. The last message is off the screen before I can read it and since the data doesn't buffer I can't scroll back to read it. I did do a status of the card, it shows "unformatted". It doesn't say not present, and I don't...
  5. joeb5110

    Storage location for password

    Thank you for the quick response. I wasn't sure anyone even reads the forums for old pbx's any more. I'm mostly certain that the translations are gone forever. I'm not convinced even a little bit that swapping cards will help, but we owe our customer a half-hearted attempt to restore the system...
  6. joeb5110

    Storage location for password

    We have a G3 (I don't have the exact version available) on which someone changed the password and didn't share it. That's fine, we replaced the pbx with IPT. We have another pbx that suffered a calamity after a power outage, and I want to raid the lost-password pbx for parts. My question is...
  7. joeb5110

    ROLM 9751 IPL

    Where does the pbx start an initial program load from? Hard disk? Memory card? We have a pbx that doesn't display IPL progress on startup. We think the hard disk is bad. The PDC repeatedly blinks as it tries to read the floppy and HD. My question is: should the system still load so I can get to...
  8. joeb5110

    Find DAC/FAC Assignments

    System: G3csiV11 Software Version: R011i.01.1.060.5
  9. joeb5110

    Find DAC/FAC Assignments

    I'm trying to change a digit from being a 2-digit DAC to a 4-digit extension, but get message "First digit has assignment; remove objects with this first digit". I had already removed instances of 7X from the feature table. I've also checked trunks & loudspeaker paging. Where else might the...
  10. joeb5110

    MDF Wiring for SL-1

    Thanks! I did read that somewhere, will have to review it again. This is similar to what we run into with Avayas because of skipped pairs. That's why proper labeling is critical.
  11. joeb5110

    MDF Wiring for SL-1

    A technician is at one of our sites to punch down some phones. He's struggling to find the ports I provided. He sent pictures of the blocks, the port numbering ends at 7. The system has many ports in the 8-15 range. In a Nortel, are the switchtails connected in such a way that all 16 ports...
  12. joeb5110

    ROLM 9751 MOD 10 HARDWARE ISSUES

    Is there anyone left besides me that supports these systems? Rolm doesn't have its own forum, I hijacked the Siemens one. I can't log in to a pbx. I've seen this error over the years but don't remember the solution. PASSWORD: INVALID OS return code (1817) This system seems to be dying a slow...
  13. joeb5110

    Escape from AMO Dialog on 9006 software

    Steve, too !@# funny! You're monitoring these posts and you caught me. One of these babies had an outage a few weekends ago, and the oncall wrote me to correct my database, that it should say 9751. I went to 178 recently for another problem, and see that these are badged as Rolm 9751's. 182 has...
  14. joeb5110

    Escape from AMO Dialog on 9006 software

    We have 4 Rolm 9751 Mod 30EX's (and a spare Hicom 300E). I have documentation on AMO dialog system commands, with one huge exception: When at the command prompt >, I can't find a way to get back to the menu, or to cancel out a command. Otherwise, I've made good progress with these. Any help is...
  15. joeb5110

    Increment variable, or set integer value using variable

    I came up with a solution. It's inelegant, but it might be technically correct, i.e. the right way. Even if not, it works.
  16. joeb5110

    Increment variable, or set integer value using variable

    I'm stumped on what should be a simple script. I want to list out extensions in a pbx based on the user input. It is easy enough for me to prompt and get the first and last extensions and assign them to variables. I can't figure out how to loop the command from the first to last. Commands can...
  17. joeb5110

    Read Manager C db in Manager E

    I can log in with the customer level password, with Manager E. I realize I don't need to use Manager C, I shouldn't have mentioned it. There was a point where I'd forgotten the customer password and thought maybe I needed Manager C, but that wasn't the case. I eventually remembered the password...
  18. joeb5110

    Read Manager C db in Manager E

    When our Hipath 3700 systems were installed, the designer set it up so that certain entries, specifically speed dials, were configurable only in Manager C. From a few postings I've read, this isn't unusual. Is there a way to save the database so that items originally configured in Manager C be...
  19. joeb5110

    Modular Messaging FTP Backup on IIS 7

    Update: I found what should be the answer in the Avaya Support database. Newer versions of FTP (such as on Windows 2008, which would also apply to Windows 7, they both use IIS 7 or higher), aren't supported in old releases of Modular Messaging. We're on 3.0, which date back to 2007.
  20. joeb5110

    Modular Messaging FTP Backup on IIS 7

    I have been doing FTP backups on MM 3.0 for a few years to a Windows XP desktop running IIS 6. With support for XP going away, I have to move this to Windows 7, with IIS 7.5. The backups no longer work. Specifically, it seems that MM can't save the .tar files. When I monitor the ftp directory, I...

Part and Inventory Search

Back
Top