Search results for query: *

Do u know how can i program the printer port? Via command, ssh or?

Hi guys, after upgrading from MiVb 8.0 to 10.0 my system ports have lost his baud rate. Right now we're using the printing port for smdr logs but it's not working because i can't change the baud rate. How can i change my baud rate to 9600 again? Do you guys now if the printer port works in MiVB...

The problem is that i can't put a baud rate for the network printer do you have any idea

Hi guys, After upgrading to MiVB 10.0 Jazzware is receiving invalid call records from the Mitel PBX. Jazware call acounting was working on Mivb 8.0. We've Reset the Jazz device, same issue, still no valid calls coming from the Mitel PBX. Do u guys now if something has changed in Mivb 10.0...

Thank you for your response guys.

Hi guys, does mitel ex controller supports ASU-II? Can you buy a CIM Port module for the ex controller? Thx

Hi Guys, I want that when someone calls a specific Direct Inward Dial (DID) number, it rings on two cellular phones simultaneously. I’ve used a phantom number and rerouted it to a speed dial, which works but only for one cellular phone. When I add the two phantom numbers in a ring group, it...

How do you program IP trunk on MiVB 9.0 and up. because we're going to migrate to MiVB 10.1 but doesnt get the network IPadress option to fill in under ICP/PBX networking -> IP networking -> Network IP address. One PBX is MiVB 10.1 and the other one is 8.0

but how does MSL know, we've had 2 hardware pbx that was communication on ip trunk but right know we are going to migrate one pbx to virtual to 10.1 and that ip/trunk network adress option has gone

Hi guys, i have a problem in MiVb 10.1 the option Network IP adress doesn't come so i can't fil the ip adress of the ip trunking. ICP/PBX Networking > IP networking > Network IP adress. What other solutions are? i dont see the option network ip adress. i see it on MiVb 8.0

Hi guys i have an ax controller version 9.4 when i access the server manager to upgrade the system i find this error. i've already tried to deactivate the serviclelink then clear hardware-id and activate the servicelink. i can ping https://swdlgw.mitel.com/ from the MiVB. My DNS is ok and i have...

Does 2 diffrent firmware matter?

Hi Guys, I'm just insert a new HD 2 in bay 2 slot, and the HD begin with the mirror proces, i get this following when i insert the redundant status command, everything looks good, but after passing 75% of mirror proces i get the following error that "Source caused rebuild failure." this is the...

Does it get stuck at 60% with this error: Unable to download from thirdparty.firmware.connect.mitelcloud.com? rebooting in 5 minutes You'll need to update the firmware for you're MiVB. See HO4838

I've update the firmware via ftp server. With the help of "KMS Article HO4838

Hi, guys Have you guys encounter this on mitel phone 6920W,I got problem with the firmware. Unable to download from thirdparty.firmware.connect.mitelcloud.com rebooting in 5 minutes Does the W version works with MiVb 8.0 and older?

Thx guys my MiVb is up and running

I'm supposed to get this Determine the active partition number (1 or 4) by accessing the controller through the Maintenance port, and then running the following command: version You will observe the following system response: VxWorks (for Mitel MMC-C PPC83XX F2500) version5.5.2. Kernel: WIND...

With which program do i do that migration? Thx for the help