Search results for query: *

We were migrating from a hosted Cisco system which we did not control the routing of we we needed to utilize LAN2 and put it on another vlan/subnet to utilize them as a SIP trunk. We initially were going to setup a dedicated network for the SBC but once we saw Comcast provided it own form of...

We are running overlapping LAN1/LAN2 IP ranges here for just about 2 years on IPO 10.1 Server Edition and have not had a problem. We did not plan on doing that but due to not being able to run a SBC we had to make some adjustments to our structure at the last minute. We configured everything...

When you say dropping do you mean the user account is still there but the phone is disconnected? If so then yes we have seen that before. The only fix I am aware of I posted in https://www.tek-tips.com/viewthread.cfm?qid=1781847 where you specify the username and password of the phone in the...

We just purchased that Planet POE ATA to use on a fax. Besides me messing up the config the 1st time around it worked well. It was able to send and receive faxes just fine. If we need ATAs in future that is what I will be purchasing.

We selected the AXIS A8105-E so it would be able to tie into our VMS as well. The camera parts have been solid like the other Axis products we have but I have seen 2-3 times total over 8 devices over 1 year where where the SIP connection breaks and the unit needs rebooted or SIP restarted. I...

We are using IPO R10.1 and it works for us. We found odd issues with the newer firmware (can't remember exactly what) so we are sticking to version 3.08-33. I have notes on what to do to setup one of our units. See if the below helps. *01 to get the IP Username: admin Password: dbl#admin...

We deployed a little over 300 J129 phones in our school district and I would have to agree with the previous comments they are pretty basic phones. I will list a few odd things I have seen with them which may or may not impact you. They seem to sometimes get logged out from our IPO system for...

Wow this post sounds similar to what we were looking for a few months ago. We took a different approach. We have a 911 emergency short code set up on each of our sites which dials 911sXXXXXXXXXX where XXXXXXXXXX is the phone number with the school's address. Seems to have worked so far. Miko

Just did a failover of 121 J129 phones twice and they failed over and back correctly each time :-D

I see what you mean in that post. My J100Supgrade.txt files are auto generated to be: IF $MODEL4 SEQ J129 GOTO J129_SW GOTO GETSET # J129_SW SET APPNAME FW_S_J129_R1_1_0_1_3.bin GOTO GETSET # GETSET GET J100settings.txt But I guess if you changed that GET to another file then you should be...

We had a ton of this randomly happening across all of our schools and seeming they would somehow get logged out in the middle of the day. We pushed the latest firmware and while we did not let it long enough to see if it helped it did not seem to fully resolve the problem. We finally decided...

We are using J129 phones in classrooms district wide. Our big issue with them now is that the default ringer is too low for a classroom. Maxing out the ringer seems to be just loud enough but it loses it's volume setting overnight it seems or after a phone reboot. Does anyone know a way to...