Search results for query: *

Hi, "CD commands" for call diversion were changed : diversion diversion_common diversion_info diversion_system LC, AD, AD are still there. MDSH> lc lcdde lcddp lclde lcldp lcopi lctdi lctmp lcudi lcddi lcipe lcldi lcope lcopp lctdp lcude MDSH> ac acbge...

FYI: I had he same problem with some BS, I had changed this BS to newer one, then upgrade was OK. here, from release Notes R3G: Description of changes relative to version R3F Bug Not possible to download SW to DB1 under certain conditions Components: DB1 JIRA: RFP-115 Background: Under...

Hi, BLFDP; sounds good to see, if there are digital Devices equipped or not (ELU28) Unequipped analog devices (ELU29) will not be shown with BLFDP. (manuell action needed, line by line) best regards, Norbert

Hi, try SFCEI; (after CNLIE:..) regards, Norbert

Hi, I not 100% sure, but I think this OPI console is a type 5 and should run on an ELU28. Take a look to the handset. The old OPI I (on ELU5) had a LEMO handset connector, the "new" OPI II (on ELU28) had a RJ10 (4Pin) handset connector best regards, Norbert

take a look to the attached filehttp://files.engineering.com/getfile.aspx?folder=37175d81-052b-4ac8-9c7b-8ec54e285be4&file=TMU_strapping.PNG

Strap 60 inserted enables 600 ohm impedance at input one. Strap 70 inserted enables 600 ohm impedance at input two. . Strap 60 removed enables 10 kohm impedance at input one. Strap 70 removed enables 10 kohm impedance at input two.

Hi, I think you will need the INL from application system Austria. VERSION=CXP1010110 There were some market specific parameters in program-units. (e.g. attenuation of different kind of trunks, etc.) regards, Norbert

Hi, use a common abbreviated dialing number. 1.) NANSI:NUMSE=1555,NUMTYP=AC; 2.) ADCOI:ABB=1555,CLASS=0&1&2&3,TRA=xxxx-xxxxxxxx; --> everyone can dial 1555. (internal and also external) --> If you don`t want that all user can dial this number you can restrict this with the CLASS-parameter -->...

Hi, FYI, looks like your spare part is also faulty or the boards (DSU and LSU) are not compatible. You wrote about a "R11" and "R7". Do the boards have the same ROF-Number ? There existed different board revisions (e.g.LSU ROF1314413/1 or /3 or /4) (and DSU ROF1314414/1 or /3 or /4) If I...

Hi Edgar, the RINGING to GSM and PANASONIC are a little bit different. PANASONIC sends a CONTACT header, GSM do not sned a CONTACT header. That`s the reason, while you can hear ring-back to Panasonic and not to GSM. In the past, MX-ONE didnot take care about this (before HF3) GSM Signal Nr. 5...

How I can see, you have updated your system from HF3 to HF4. Do you have a difference in the settings of sip_route ? e.g. in "profile" or "service" (sip_route -print -route xx -short) are the RINGING really "same" ? As I already told you, I have same problem with a SIP trunk to an IPC trading...

??? more information would be helpfull. TSW or TSE ? Version of the system Analog-, ISDN- or SIP-trunk ? ROCAP, RODAP, RODDP . Who does send release signal? --> a trace would show who release the connection. best regards, Norbert

Hi, I think the only one way to get the whished Information is to contact MITEL. http://www.mitel.com/ On this page you can find the contact for your region. best regards, Norbert

Hi Benami, first a little question, are you a Mitel Partner ? You will also need the documentation for the MX-ONE, called CPI (600Mb) This can be downloaded from a FTP-Server, but for partners only, as far as I know. Virtual appliance is also downloadable from this FTP-server. regards, Norbert

Hi, <IPGKP:LIM=1; GATEKEEPER DATA LIM TIMNET TMLOAD CODECS GKID BPOS 1 5 0 32104BC56789A LIM1 1-0-30 END <IPGKC:LIM=1,CODECS=0-1-2-3-4-5-6-7-8-9-A-B-C; EXECUTED <IPGKP:LIM=1; GATEKEEPER DATA LIM TIMNET TMLOAD CODECS...

Hi, same Q-Sig License is used for BRI and PRI. One way is to reduce the channels from your PRI (if not all 30 channels are needed) to have 2 free available Licenses for your BRI. best regards, Norbert

Hi, printout "LIDAP" and take a look to "EXTERNAL-LINE-QSIG" (allowed used) regards, Norbert

Hi, 00:11 is the time, when the daily file (with the traffic measurement data) is stored to disk. Do you run an automatic dump "DUSYI" at this time ?? (check with DUFQP)(maybe a timing problem when dumping customer data and TM-data) The available size of your SYSSUBFS11 looks a little bit low...

CNREC:LIM=5,REU=NO; (LIM 5 will not supervise "Ringing Voltage")