codecs print

[marito1]

hello!!!
COULD SOMEONE HEPLME WITH some MD 110 commands?
1) which is codecs print command to find the codecs priority for ip phones on MD 110 PABX.
2) which is the command to change the codecs (for squealing phones reasons)
THANKS

 

[snor]

Hi,
<IPGKP:LIM=1;
GATEKEEPER DATA
LIM TIMNET TMLOAD CODECS GKID BPOS
1 5 0 32104BC56789A LIM1 1-0-30
END

<IPGKC:LIM=1,CODECS=0-1-2-3-4-5-6-7-8-9-A-B-C;
EXECUTED

<IPGKP:LIM=1;
GATEKEEPER DATA
LIM TIMNET TMLOAD CODECS GKID BPOS
1 5 0 0123456789ABC LIM1 1-0-30
END

Number CODEC
0 G.729 annex A and annex B
1 G.729 annex B
2 G.729 annex A
3 G.729
4 G.723.1
5 G.723.1 annex C
6 GSM Enhanced Full Rate
7 GSM Full Rate
8 G.728
9 G.711 A-law, 56 kbit/s
A G.711 µ-law, 56 kbit/s
B G.711 A-law, 64 kbit/s
C G.711 µ-law, 64 kbit/s

regards,
Norbert