Search results for query: *

Hi, Yes Mitel have 'taken over' Unify/Atos/Siemens Telephone equipment but on the forum here the equipment is still broken up in the old way of who manufactured it originally - please re-submit your question to the Siemens:Hicom forum and you will get a response there. As far as I know you can...

I've sent you a message about this - please respond - thank you

If this is OpenScape 4000 ? Call Log = CHANGE-SBCSU:STNO=XXXX,OPT=OPTI,CALLOG=?? Set the TAPRO (KeyMap) for the phone to correctly use redial keys. Make sure no phone is using TAPRO 40 DIS-TAPRO:STN,,40; If no phone is using TAPRO 40 then set it to be CP400 CHA-TAPRO:,40,CP400; Move the Phone...

RING as Moriendi has said is to override a forwarding - to do that on a standard phone you have to add a value for FWDIGNOR in WABE. ADD-WABE:**444,,,FWDIGNOR,N; Then Dial the code (example **444) you get dial tone and then dial the extension - it will ring the actual phone and not forward to...

STA-LOGBK will give you the AMO's and users that used them

That will not be available because your CTRL-T/X is not actually logged. However, if you have different USER's Setup then you will see what AMO's they carried out and when. If you DIS-USER; you will see the users that are added.

What Call charging (CDR) do you have running currently ?

Please update the Assistant, RMX, CSTA, Loadware and Platform and test again

Unlikely to be a licence problem especially if you have only set it up - you get 30 days to provide a licence Show a screenshot of the 'front page' of the assistant please

If you mean the SoftGate licence then https to the IP address of the SoftGate that you see when you DIS-BCSU; Then look for the licences area on the left. If sucessfull in transferring the licence then you should see an entry in HISTA

Read FAQ Above to access Gigatribe for DERT

Hi XDM - can you please share with me so as I can put them on the shared file system for everyone - thank you

There is a pdf - not sure how much info is on it - check the FAQ here and then go to GigaTribe as described in the FAQ HFA SIP OpenScape OpenStage iSDX Realitis HiPath DX Rolm 9600 Hicom OSB Software Downloads

Silly Question but if there is a USB Stick in the B node - it might not boot up - there is a setting in the BIOS ?

You'll need to test this - you could temporarily add in your own number and test it that way. You may have to remove the first digit - let me know if it works or not

Ok no problem - You have to add in the CLIMA and then add in the numbers that you want barred. Then you have to tell the incoming trunks to look at the CLIMA table to see if any number there is barred. This was supposed to have worked from V3 - you can add it on in V3 but it does not work. I...

The only way is to use the AMO CLIMA

The only way is to use the AMO CLIMA

Indeed - thanks for that - but the clock will drift which is where the NTP comes in. You can setup an NTP server on a computer on your network https://www.meinbergglobal.com/english/sw/ntp.htm

Well you of course have to ensure that the PENS are signed off as well. REG-BCSU;