OpenScape 4000 Internal Call CDR

[kritsadadetc]

Hello All, Can you help me

As we know that the Hicom / HiPath / OpenScape 4000 not have send CDR which an internal call is not answered.
Could you have any experience in this if we need internal call CDR record which no answered call too ?
(Extension <=> Extension, Operator <=> Extension)
Also External <=> Extension no answered if possible.

 

[sbcsu]

What Call charging (CDR) do you have running currently ?

 

[lisluk]

From the https://www.tek-tips.com/threads/op...-unanswered-calls-are-missing-in-cdr.1828243/:
"Either SELG (SELT) THRGCON setting to N (Y means 'only through connected', so setting N collects more, not less), or ZAND CCD CDRRINGB to YES (cdr for ring back), or setting both, might help here."

 

[kritsadadetc]

What Call charging (CDR) do you have running currently ?

SLEG #3 and already done working fine by @lisluk advise, thank you.

 

[kritsadadetc]

From the https://www.tek-tips.com/threads/op...-unanswered-calls-are-missing-in-cdr.1828243/:
"Either SELG (SELT) THRGCON setting to N (Y means 'only through connected', so setting N collects more, not less), or ZAND CCD CDRRINGB to YES (cdr for ring back), or setting both, might help here."

Solved following your advised, Its working fine and thank you so much.