Search results for query: *

Sorry, I wasn't clear. The network issue was with VLANs from another vendor. I am sure you have experienced another vendor telling you the network is ready but you can't ping the server from a phone... I followed the "SIP Telephone Installation Notes" and used the "Simple Installation"...

Doing a new install on a 500v2 with Avaya J139 telephones running 11.0.4.0.0 build 74. Had to prove a network issue which has put a pinch on the install date. Does anyone have any experience with this install, and if using the 500v2 as the DHCP and HTTP file server do you still need to mess...

In System Manager go to: 1. System 2. Telephony a. Dial Delay Time (seconds) Reduce this time but be careful. Too much and the system will cut you off before you finish dialing. You may also press # after dialing. Pressing # is like hitting send on your cell. Otherwise the system waits...

Can you use the manual .rpm method for upgrading from 8.0.x to 8.1.x???? Avaya documentation seems to read that this major of an upgrade requires the USB method. (I know Avaya documentation and dot releases should always be meet with suspicion.) Also, if you download the UCM zip....is that...

NI2 seems to be working. I have the clocking set to: Local "Network" and LD "Unsustainable" The LD was logging some clock slips but they are decreasing. We've been running for about a half an hour with 0 clock slips.

We upgraded an existing system on Thursday night. (Changed an IP 406 R3 to an IP500 V2 and used legacy two legacy T1/PRIs) The previous settings were 5ESS, B8ZS, ESF, CRC On. The telco has performed intrusion testing and replaced the smart jack. The LD carrier has stated we should be NI2...

We currently have the switch set to 5ESS, I was thinking of trying NI2? It's an AT&T circuit and I know they like NI2.... Any thoughts?

Here's another trace with no csu in front of the IPO. ********** Warning: Logging to Screen Started ********** 14055019mS PRN: FalcLockedChecks FPGA_FIFO_CTRL: 4; FIFO_CTRL: 4 14055020mS PRN: Falc 5 slip 14055020mS PRN: WARNING: 14055020mS PRN: ****Reset Slip Store Falc 5 0 0...

We did, we removed it before this monitor session was taken.

Here's a trace from Monitor. V5 is a local PRI V9 is an LD PRI 6176536mS ISDNL3Tx: v=9 peb=9 ISDN Layer3 Pcol=08(Q931) Reflen=2 ref=0019(Remote) Message Type = ConnectAck 6176536mS ISDNL2Tx: v=9 peb=9 0000 00 01 0c 10 08 02 00 19 0f...

We are receiving the following errors unders system status: Error Seconds: 43 Severely Errored Seconds: 5 Clock Slips: 160 Missed Frames: 4477

We have had at&t look at the line several times. We keep getting clock slips and the trunk never comes up. Is there a certain trace I can run to help?

We have a customer with an IPO R8 that has been experiencing clocking issues on an AT&T Local PRI and an AT&T LD PRI for some time. I know it is preferred to only have one clock source but the clocking appears to be off because we get errors no matter which clock we choose. We also tried...