Search results for query: *

How to initiate and stop a forced download

That was the problem thank you sir, the NCOS frl was on switch only. Changed the NCOS to match the FRL to go off swithc and it works thank you all

that is correct

PRI* TRK LOOP 2 - ENBL FFMT/LCMT/YALMT: ESF/B8Z/FDL SERVICE RESTORE: YES YEL ALM PROCESS: YES ALARM STATUS : NO ALARM CH 01 - IDLE TIE VOD * CH 02 - IDLE TIE VOD * CH 03 - IDLE TIE VOD * CH 04 - IDLE TIE VOD * CH 05 - IDLE TIE VOD * CH 06 - IDLE...

YPE TLST TKTP TIE ROUT 2 DES LOUISA TN 002 01 MBER 1 LOUISA TN 002 02 MBER 2 LOUISA TN 002 03 MBER 3 LOUISA TN 002 04 MBER 4 LOUISA TN 002 05 MBER 5 LOUISA TN 002 06 MBER 6 LOUISA TN 002 07 MBER 7 LOUISA TN 002 08 MBER 8 LOUISA TN 002 09 MBER 9 LOUISA TN 002 10 MBER...

TYPE RDB CUST 00 ROUT 2 DES LOUISA TKTP TIE NPID_TBL_NUM 0 ESN NO CNVT NO SAT NO IDEF NET RCLS EXT VTRK NO DTRK YES BRIP NO DGTP PRI ISDN YES MODE PRA IFC SL1 PNI 00002 NCNA YES NCRD YES TRO YES CHTY BCH CTYP UKWN INAC YES ISAR NO DAPC NO DSEL...

The Bcm50 is long distance, but I am using a a Tie trucnk through Microwave to connect these systems together. Also changed the INAC to yes, and that didn't make any difference.

Pstn(PRI)

Please assist what is the process on the M1

yes I have changed all of that, when the digits get to the M1, I see let me give an example: DCH 0 IMSG SETUP REF 00008001 CH 2 23 TOD 10:47:46 FEAT :NAS CALLING #:5408988500 NUM PLAN: E164/NATIONAL (NPA) CALLED #:5383577 NUM PLAN: E164/NATIONAL (NPA) this is what I get on...

I am setting up least cost routing from BCM50 to M1. I have turned on messsging on the M1, I see the digits that are being dialed fromthe BCM, but I get a pause then fast busy after dialing the full number. Any help would be appreciated.

Also an IVR port is 1 to 1, 1 user, 1 port, an Access port can handle up to 50 simutaneously calls at one time, if it is programmed properly. My two Cents