Search results for query: *

Thanks for all the feedback guy, The issue was the power supply was fried. I replaced an all is good.. thanks again

This morning I change the jack to a new 6 conductor jack an the same issue. An also I used the volt meter to check to see it any volts was getting to the jack an i was getting a read, I also tested @ the power supply an was not getting a read i had another power supply it wasnt new but it also...

Im still having a problem getting power to the cap the 7324 will power on but cap does nothing. I have a nortel power supply with - + punched down on the block an from the station end i have the power punched down to 3&6 an DN to 4&5 using a 4pair jack. If anyone can see what's wrong could u plz...

Thanks for getting back to me guys. Iam familar working with differ connections havent really mess around wit this type of system bfore, but it's no biggie i pickup on things quick thats how i got to where im @ now, but thanks alot guys ur info was helpful got the pa sys up an working..

I have 2 cap attached to 2 seperate 7324 an the 7324 will powerup but the cap will not. I punched the power supply down to the station an still no powerup. Not sure if im doing this right im new to this equitment Could someone plz break it down how the 24v power should be punched down an if...

Thanks for the feedback. I do have an amp an everything should be configured, well it was config for five speakers an 4 horn the new office they will only be using 3 speakers an I didnt know where to hook the speaker wires to. So i do not punch the speakers wres down to a block they are attached...

I need some info on where to punch down the speaker wires to the 66 block for the paging on a 8x24 MICS.