Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. FrankD001

    Linking Mitel 2k or 3300 to Asterisk PBX via PRI

    Yes SIP trunking is an option- I was working on a proof of concept project and was trying to utilize existing hardware- SIP trunk licence would cost me $100 each (x23=$2300)- I have spare PRI cards- so hence my attempt. that project is completed and we decided to use SIP user licenses in the...
  2. FrankD001

    YA Lite

    I believe the docs say that you can have .net 2 installed but you must have 1.1 for YA to run. BTW How do you like it. I was test driving it for the softphone and I am not very happy with it as a soft phone solution.
  3. FrankD001

    ccts unseizable

    not seizable may also indicate a carrier issue. A load may help but if the issue is carrier related you will need to place a service call with them
  4. FrankD001

    5020 / 5215 IP Phones and YA

    Per the Teleworker 4.5 documentation those sets will work as teleworkers -supported- 5020,5212,5215(reg & dual mode),5220 (reg & dual mode),5224, 5235, 5330, 5340,5560
  5. FrankD001

    Linking Mitel 2k or 3300 to Asterisk PBX via PRI

    Thx for the reply. I do not have the QSIG options in my switch. I am trying to come up with a viable solution using existing hardware with out incurring additional MITEL purchases. If I can connect via existing PRI cards I can save $$ in additioal license purchases. Besides this is a proof of...
  6. FrankD001

    Linking Mitel 2k or 3300 to Asterisk PBX via PRI

    I am working on a proof of concept soft phone server project. I am trying to have my MITEL PBX be the "Telco" for a AsteriskNOW PBX. I have a Wildcard TE110p clone card (OpenVOX D100p)configured in the Asterisk system linked to an available PRI card via T1 cross over cable in a DSU in my 2K...
  7. FrankD001

    Static on Mitel 3300 Phones - Mitel 5220 IP Phone

    MitelGuy I noticed the feedback type echo on an IP set to IP set phone call within the 3300. Im my cluster I have 2-2K switchs and the 3300. All trunking goes thru the 2Ks on either PRI or DS1. I noticed this same feed back type echo at a branch which is only 3300 with copper trunks. What I saw...
  8. FrankD001

    Static on Mitel 3300 Phones - Mitel 5220 IP Phone

    I have noticed that when the volume on the 5220 sets are increased this is also increasing the microphone transmit gain. In my situation I noticed a feedback type of echo when the volume is maxed out. This is a new implemtation here in NJ. I am not sure what is the cause and am hoping for an...

Part and Inventory Search

Back
Top