Search results for query: *

I was looking over your information and found a common problem with Nortel you are doing... You have the recieved digits match extension numbers and this is a no no on Norstar systems if you want problems like this..... Yes I know what you are thinking I always match recieved numbers with...

My switch is a D-Link DSS-5+. Yes I agree this should not be this difficult, I do have experience in setting up IP systems Avaya IP Office, NEC, and Definity also. I am just stumped by this one... I have not got the PC's to set up soft phones right now... As for connectivity yes I can see the...

I have nat turned off ... My set up is simple BCM , 5 port switch , PC for programming and soft phone and 2 IP hard phones everthing is at default on system execpt for installed cards in BCM .........

Nortel products have this problem ( Execpt Option 11 )there are memmory problems with the equipment when the recieved number matches the extension number on the system it will cause several different problems. The easy to get around this is to have the T%1/ PRI vendor change the lead digit of...

Thank you all very much for the help.... Yes I did have to change the next hop router to 10.10.10.1 but the phone still do the same thing , they will not download programming from the server ... When the phones are first powered up they find the server and about 2 minutes later they reset and do...

BCM IP is LAN 1 10.10.10.1 BCM IP is LAN 2 10.10.11.1 PC\Softphone 10.10.10.2 IP i2004 set 1 10.10.10.3 IP i2004 set 2 10.10.10.4 Can not find a gateway address on BCM , is there a different heading name? Ip phone 1 set up IP# 10.10.10.3 Server 10.10.10.1 port 7000

Yes I have a small LAN setup, BCM, 1 pc for programming and to run soft phone a 5 port switch this is all in a test environment, no firewall at all plus the BCM firewall is turned off only thing on is DHCP in the BCM ... The BCM issues a Ip address to the phone but the phone never logins to the...

Yes I do, I can get the phone to log into the server but the BCM will not issue a extension number to it phone to allow it to come up and operate. Could there be a revision issue with the phones and they needa flash upgrade for the 3.6 system?

I have a BCM test system version 3.6 and trying to get i2004 sets to work on it. I already have the soft phone working off of it. Can anyone out there give me the information on how to get the i2004 sets working off of it....