Search results for query: *

Figured out what I was doing wrong. I was not using the advanced options, I was only using assigned.

Hello, I am attempting to deploy an MSI via Group Policy's Software Install on a Windows 2000 Server Domain. This particular MSI needs a transforms (.MST)file in order to be installed in the manner necessary. After creating a Test OU, assigning the MSI via Group Policy to Computer...

A little addition if map a static NAT translation for a specific machine or use one of the machines which already have a static NAT translation mapped it works fine.

I am having a problem with NAT on CISCO 1841 router. Here is the situation. I am trying to contact a FTP server on a non standard port 5000. For machines that have been statically assigned it works fine. For any machine using the x.x.x.38 NAT overload IP none get any farther in the FTP...

Thank You Very Much TouchToneTommy, it was exactly what I was looking for.

Hello, I am wondering on a Magix system how to increase the number of rings before a call is transferred to voicemail for a specific extension. I know I did this once before in the past but can't find it in the documentation I have available. Any ideas?

What I ended up doing, since it was decided to go ahead was using a cheap $10 single line phone. I was completely off on which port I was planning on using. I ended up switching port 58 on the system as the tip ring port as port 60 and 59 were already set that way. Made sense to keep them all...

Extension 18 is the extension number of the door phone. It would be ringing the operator extension. I think I found the problem, however, I have not had the chance to test it. In the documentation I found for the hotline feature, the port the hotline phone is connected to should be a tip/ring...

You can pickup another extension by hitting feature (or #) 9 then dialing the extension number. How we do it where I work is all phones have a pickup button making it easier for a user. To program the button hit feature 0 0 press the button you wish to make a pickup button and press *9 to make...

I have setup the Personal Speed Dial on this extension, extension 18 if it is of any help with a Personal Speed Dial of the extension I want the phone to call. I have gone through extension programming to the hotline feature and set it extension 18. Problem is that the setting does not seem...

I was wondering if it is possible and how to go about programming a system phone to act as a "front door phone". Basically the front door phone would ideally connect to another extension on the Magix system when the receiver was picked up. Or if needed a button could be assigned to the front...

Just tested it out looks like it was> I have upped the following ip inspect one-minute high 4000 ip inspect one-minute low 3000 Now works beautifully. Thank you all for you help. brianinms, plshlpme, burtsbees, and DanInRaleigh. Your assistance is deeply, deeply appreciated.

I wonder if this has something to do with it. I ran a show ip inspect statistics all. This is what it returned. Packet inspection statistics [process switch:fast switch] tcp packets: [4625:4021] udp packets: [24:0] smtp packets: [0:221] Interfaces configured for inspection 1 Session...

Strange thing is I can make a single entry to the 101 access-list just defining a server and port. For instance access-list 101 permit tcp any host X.X.X.33 eq 1494 and instantly the connection to the Internet becomes unusable. plshlpme I probably would have said the same thing about trading...

I believe I have the same setup if not in number of specified protocols but in what should work in general practice with the following. ip inspect dns-timeout 15 ip inspect name outbound tcp ip inspect name outbound udp ip inspect name outbound ftp ip inspect name outbound realaudio ip inspect...

From the guide you posted "CBAC creates temporary openings in access lists at firewall interfaces. These openings are created when specified traffic exits your internal network through the firewall. The openings allow returning traffic (that would normally be blocked) and additional data...

Then how do I go about letting in traffic over the NAT x.x.x.38. At least from the configuration of the 1721 it was my opinion that the CBAC's ip inspect commands were supposed to let the NAT traffic both in and out? I could go with with an permit any on x.x.x.38. This still leaves me with one...

Let me see if I am understanding this correctly. If not please correct me. The access-list 101 that I am attempting to put in to place is too long, which is causing too much use of the routers resources and while having to process the list. You believe that this is the cause of the issues I...

So far to the best of my ability it appears to have to do with the access list 101. As soon as it is applied the slow performance with frequent connection losses begins. I remove access-list 101 and performance goes to back to normal. Thing is I just can figure what the issue with the list...

I have tried it with both ip cef both off and on it seems to make no difference.