Search results for query: *

pending AAA just means the switch hasn't gotten to the point where it can accept a username and password. Wait a few seconds and it will say that it is now available. The default username for a summit switch is admin, no password. ------------------------------- ENA, JNCIA, MCSE, GSE (Google...

You need to upgrade both switches to XOS 12. Then do the following: 1. Turn off the switches, and cable them together with the stacking cables (crossing the two cables so port 1 to port 2 and then port 2 to port 1) Then: enable stacking This will wipe out the switches though, and you'll...

I think he's referring to stacking. The stacking ports on the back of the x450's allow for stacking multiple switches together as a single switch for configuration purposes. You need XOS 12.0 or higher to enable it, as well as the stacking cables from Extreme. -------------------------------...

Like jettman96 said: config stacking <enter> It will walk you through the steps to get the switches stacked. Then it will reboot the switches. After which you can configure the VLANs, etc. as if it were all one big switch, just like he said as well. For VLANs, it's probably best that you...

You'll have to get it from www.extremenetworks.com. ------------------------------- ENA, JNCIA, MCSE, GSE (Google Search Expert)

You need to configure a default route on the switch if you are making it the servers default gateway. config ipr add default <etc.>

You can do the following: config <vlan name> del ports <1:1-1:24, or whatever> config <vlan name> add ports <the ports you deleted above> they will inherit the tags, etc. of the vlan.