Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Extreme Summit 24 switch VLANs and ISA server

Status
Not open for further replies.

GigaG

Technical User
Aug 28, 2007
83
US
here is the scenario... I have a network with an ISA server as a firewall / Web filter. I am installing a 24 port Extreme Summit and would like to VLAN the servers from the workstations. So far i have created a vlan named servers gave it an IP address of 172.17.1.4 /24 and enabled ipfowarding. i gave it a default Gateway of 172.17.1.113 (This is the ISA server) and the other servers are currently running on the same network 172.17.1.x. (This will hopefully change). As soon as I change my gatway to the switch, nothing works. I am able to ping 172.17.1.4 and 172.17.1.113 and the switch can ping everything, but I still cannot get to the internet and when i look at the logs in the ISA server, it's like it never even gets there. Also i was wondering why when enabling tagging on these ports I loose connection to everything??

Anyone have any suggestions to move foward with?

MCP ACA-I CTP
 
You need to configure a default route on the switch if you are making it the servers default gateway.

config ipr add default <etc.>
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top