Search results for query: *

Yo Printer Guru's ; Has anybody tried to reset the Ink Message Bar which shows the estimated Ink Level for the Black and Colored Cartridges after a refil. Can we reset it using Regedit. Knowledge is a gift from God sharing it with friends and strangers, make you a better person, inside and outside.

Yo Guys, Need Help on this setup: My customer wants to use an old 486clipper(DbaseIII) program in Dos mode, How can I use the program with his new computer running WinXP. Option #1 I can remove the old HardDrive from her Old 486(Still running) Computer and Put it in her new Computer and create a...

Yo Bro try to delete the driver using the Add/Remove Program. And if you are familiar the RegEdit Program Use it and remove any trace of the said driver and do a complete install of the driver. If the problem still is present after a reboot check the touchpad for dirts and try removing the...

Yo Bro the best answer I can recomend to you is to check your motherboard setting. The Athlon 1.4 has a FSB of 100mhz, so upgrading to Athlon XP 1800+ your FSB should be 133mhz or higher. Find the jumper setting on the board or if its jumperless change it in the CMOS. Knowledge is a gift from...

Winsonic WSV6A07 Motherboard - Up to what speed of processor can I put in this board. Is there a way to put Athlon Xp Processor on this board, like processor over 2.0 ghz. Chipset - VIA KT Chipset(VT8363/686A) Processor - Support all future processor use Socket A with bus speed of 100mhz Can...

Yo Bro have you tried disabling the built in sound if your planning to use your soundblaster. If not remove your soundblaster and make sure that in your CMOS the option for your built in sound card is set to enable. Also check inside your unit if the sound cable from your CDROM is attached to...

What other stuff do you have: CDwriter, how many harddrives, cause it might be your power supply, a time table of 15mins then it shut's down well...it might also be the new bios you installed did you make a backup of your old bios(I hope so). My unit has 4 extra casing fans to regulate air...

Yo bro most of the units I build I usually set the shutdown temp to around 60 to help the lifespan of your processor. Please tell me the cooling system of your unit. Knowledge is a gift from God sharing it with friends and strangers, make you a better person, inside and outside.

Yo arthure I have one question what type of setup did you use for your Xp(Fat32 or NTFS) if NTFS try sticking with it and remove your 98. In the past people I encounter with Dual systems one with Fat32 and one with NTFS most likely one system would hang, well thats always the worst thing that...

You can put any type of sound card even if its the expensive type or the cheaps you can find as long as its a PCI card and always check the description at the back of the soundcard box if it will be able to handle your unit. But base on my experince in PC assembly I dont see anything that can...

When your system is still counting keep pressing the delete key until you the systems make keyboard lick sound due to the no of press. F1 key is diaplayed if a CMOS error is detected. When inside follow Ski's advice and also check if the floppy drive is being detected if so disable it for the...

Yo bro those temp readings are ok, but if you could set your CMOS to shutdown or give you a warning if it reaches 60 and thats ok. Try this, put your unit to a burn test with not aircon or even an electric fan on and keep it running until it shutdown, if it does not shutdown and maintain an...

dakota81 is correct in most cases using one agp and one pci video card can be done if you will be using 2 monitors for cad purposes or whatever purpose you need to have 2 monitors. But if you would be using it as a selector on which video card your going to use it might give you driver and dll...

Try booting from your boot up disk, but make sure that your CMOS boot first from your floppy drive and enable floppy drive seek. After booting from your boot up disk run fdisk and check the condition of your partition, if both are ok then we are in business. Reformat your drive c and reinstall...

Yo bro if i understand it correctly you would like to have a dual boot OS machine. If yes it is better to reformat your new drive and use your XP Home cd to boot for you. Try checking if during the installation process there is an option for you to reformat your new drive and at the same time...

Additonal question to my post, I have a CDRom a separate power source 12V and a couple of speakers. How will I connect them all and upon inserting a Audio Cd the CDrom will start playing it. What do I need to do to make it work the way I like it. I won't be using any AMP on it just amplified...

Many thanks to members that answer my post, but how will I ask members like franklin97355 and fluxvoovoo additional question and send them personal thank you notes or email.

Yo Sierrapeac; First of all dakota81 might be right that it's a sign of a bigger problem but before we make it an option, have you tried going to the website of the motherboard and downloading an updated version of your bios. In some cases the manufacturer would issue updates to patch up...

I read in one forum that if you have an Extra CDRom available you could turn it to an independent CD player. All you need is a working CDRom a 12 volts power supply and speakers and what else do I have to do to start with this small project. Here in the Philippines they are selling this type of...

Hello Fellow Tech. Users; I have a problem a company here in the Philippines is offering a service which day say can bring harddisk that cannot be detected back to life but the problem is they will be erasing all the file content because I heared them say that they were going to reset the...