Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. savvy0316

    How to use the MCDN between a 50 & 400?

    SIP trunking on BCM50 R3 supports MWI over SIP trunks with MCDN. Since your VM are not centralised, the other work around for your problem is to assign a DN number within the DN range of the BCM50 to the AUTO DN under Dialing Plan.... this will allow DISA access. Wher user call into this AUTO...
  2. savvy0316

    BCM 50 VOIP

    Once you are upgraded to Relese 3, you can use the try n Buy VoIP Trunk keycodes. Once the VoIP trunks are activated on your BCM50 R3 system, they will be automatically assigned to line pool BlocA. To access thes trunk to your Skype server, all you need to do is 1> Define the remote gateway...
  3. savvy0316

    BCM 50 Modem

    Login to BCM Monitor, in one of the tabs, it tells you what your MODEM DN is. NCSS NCDS NCTS
  4. savvy0316

    Can I just move jumper wire and phone?

    For digital phones, the lines are hardwired in the system and the DSM modules. If you moved the wire, you will be assign a new line number ---> new DN. Floor Outlet ------------- -------------- ==1 || 1 BCM / DSM |--- |Patch Pannel | ==2...
  5. savvy0316

    off premise message notification

    In CallPilot Manager, under your mailbox, with the Off Site Notificsation, once you enable it, you have to specify the type of access to go out of the system (line/ line pool or route), then you need to enter the correct digits (includes destination code... etc and the off site number you want...
  6. savvy0316

    BCM50 got Invalid keycode file error

    The MAC address on the underside of the BCM50 is the System ID. NCSS - BCM.
  7. savvy0316

    Remote IP Users on BCM 50

    The number of calls a DSL connection can support depends on the bandsidth of the link and the CODEC used on the IP sets. G7.11 CODEC will use about 84Kbp/s per call G.729 CODEC will use about 24Kbp/s per call Use a VPN router at the remote site is a good idea, because the Nortel VPN router...
  8. savvy0316

    How can I assign different DN to a phone?

    Under Active Set, change DN bbbb back to aaaa and assign a Target line to DN bbbb and populate bbbb in both Private & Public received number.
  9. savvy0316

    Reimage BCM50 Hard Disk

    Thanks Heros2007. I thought of that, reliable sources from Nortel advised that ghost does not work for BCM50, it works for BCM200/400. Also there is a Level 3 reset for the BCM50. You heard of it before ? Have you tried this method before ?
  10. savvy0316

    Reimage BCM50 Hard Disk

    Does anyone know how to re-image the hard disk for BCM50 ?

Part and Inventory Search

Back
Top